Models > DECIFL0

DECIFL0 Frigidaire Dryer - Overview

Get Parts and Repair Help for DECIFL0

If you know the dryer repair part you need, you can browse the list of all parts on the DECIFL0, or you can search by name or part description. You can also find your part by where it is located on the DECIFL0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for DECIFL0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$18.79

Rear Drum Bearing Kit

This kit includes one bearing, one ball shaft, one ball bearing, one ball bearing retainer, a small tube of high temperature lubricant and installation screws.

Order within the next 7 hrs and your part ships today!
$18.16

Upper Drum Glide

Front upper felt glide pad with 3 nylon glides - includes adhesive.

Order within the next 7 hrs and your part ships today!
$2.83

Drum Support Bearing

This part attaches onto the inside of the rear panel of the cabinet.

Order within the next 7 hrs and your part ships today!
$25.18

Door Catch

This part helps keep the door closed while the machine is running.

Order within the next 7 hrs and your part ships today!
$7.32

Door Strike

"Male" piece of a dryer door closing mechanism.

Order within the next 7 hrs and your part ships today!
$8.70

Bearing Bracket

This part mounts on the inside of the rear cabinet.

Order within the next 7 hrs and your part ships today!
$9.82

Idler Pulley Assembly

Use this idler pulley assembly with gas or electric clothes dryer that has a flat dryer belt. ***Please NOTE: This part has been redesigned by the manufacturer and may not fit you...

Order within the next 7 hrs and your part ships today!
$7.78

Flat Style Belt

This is a flat style ridgeless dryer belt.

Order within the next 7 hrs and your part ships today!
$31.02

Seal

Adhesive is sold separately.

Order within the next 7 hrs and your part ships today!
$7.29

Grounding Ball

Sold individually.

Order within the next 7 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Loud Squeaking

  • Customer: Frank from Boyertown PA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 263 of 271 people found this instruction helpful
1. Unplug dryer from outlet
2. Using Lg. flat screwdriver, pry under the front edge of the top and release two spring tabs
3. Lift up top and tilt back out of your way
4. Unscrew two phillips scews on inside of front panel
5. Lift up and out the front panel. Two spring clips at bottom.
6. Rlease tension on drum belt at the motor. Acc... read more

Drum glide wore down and caused close to get stuck between drum and front panel.

  • Customer: William from Boise ID
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 167 of 232 people found this instruction helpful
Unpluged dryer. Removed the top of dryer by pushing in a retaining clip on both sides of the front lip with a screw driver. Remove the two screws on both sides of front panel. These screws are square head or phillips #2. Unplugged the wiring harness to front panel (make sure power has been disconnected). Support drum and lean front panel away from dryer ... read more

Torn Lint Screen

  • Customer: David from Birmingham MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 21 of 23 people found this instruction helpful
Actually, I didn't install the frame. I only needed the lint screen. So EASY, obviously... I just placed the new lint screen in the old frame. We had been messing around with the torn lint screen for more than one year. Installing the new part was as easy as ordering from PartSelect. read more