Models > DE26D6 > Instructions

DE26D6 Admiral Dryer - Instructions

Installation Instructions for parts on models starting with DE26D6

These instructions have been submitted by other PartSelect customers and can help guide you through the dryer repair with useful information like difficulty of repair, length of repair, tools needed, and more.

Models starting with DE26D6

All Instructions for models starting with DE26D6
1-5 of 5
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

No leveling legs

  • Customer: stephen from montgomery NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Wrench(Adjustable)
  • 1 of 2 people found this instruction helpful
Ordered the leveling bolts, very fast shipping, parts correct as shown. Purchased a condo by the shore, frige had no levelers, they went in smoothly & was done in no time.
Steve

Cracked terminal block

  • Customer: Anthony from New Fairfield CT
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers, Socket set, Wrench set, Wrench(Adjustable)
  • 1 of 3 people found this instruction helpful
Killed the power, used socket set, installed new one.
Needed wire cutters and stripper, to put new terminal ring. Reconnected everything. Took about 20 minutes.

Renters removed leveling legs from refrigerator. I don't know why!

  • Customer: Don from Frankfort KY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
I tilted the unit back enough to scew the new legs into the threaded holes.

Terminal block and power cord melted.

  • Customer: Michael from Orient OH
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Socket set
  • 0 of 2 people found this instruction helpful
Removed power cord and terminal block and replaced with new ones. Still could'nt find why dryer would not run. Founed I had not hooked up one of the power wires as it had turned up so it couldnt be seen. Hooked it up and dryer runs like new. Thanks for the quick shipment.

terminel block melted

  • Customer: Lonnie from Soda Springs ID
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
replaced the terminal block
All Instructions for models starting with DE26D6
1-5 of 5