Models > DDB1501AWB > Instructions

DDB1501AWB Admiral Dishwasher - Instructions

All installation instructions for DDB1501AWB parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dishwasher repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the DDB1501AWB
331-345 of 367
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The dishes had grime on them. The filter was torn.

  • Customer: Lisa from Vista CA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed the old filter and installed the new one.

not cleaning dishes and food left on dishes

  • Customer: anthony from coram NY
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
me i didnt do the repair my wife did and let me tell you that i was inpressed that she was able to disassemble and replace the accumulator filter with no problem by herself she followed the advice of others on this site and i want to thank everyone for making this a easy job that anyone can do themselfs

broken silverware basket

  • Customer: john from okeana OH
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
simple replacement.

leak inlet gasket

  • Customer: Tom from Freeland MI
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Wrench set
  • 0 of 0 people found this instruction helpful
Very simple repair.. the longest time was disconnecting and reconnecting water line

The water no longer sprayed out of any of the arms

  • Customer: JT from FLORENCE MT
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
I simply removed everything from the bottom on the inside of the dishwasher, required a philips and torque head bits. removed the chopper that was plastic and replaced it with the new parts that I ordered, the original seal was fine so I left it but I saved the new one so if ever needed, it's available to me. The whole process was extremely easy even though it had to be accomplished leaning over the open door and I am an extremely large man, Odd thing though was, I called 2 appliance repair companies and when I explained the symptons, they both told me it was a bad motor and it would be wiser to purchase a new dishwasher. I did my own diagnosis by taking everything encluding the chopper off and putting a piece of ducttape on the motorshaft like a flag, pushed start and then opened the door and to my amazement the flag was spinning, sooooooo, wasn't a bad motor and through further examination, I noticed the threads were stripped out of the plastic chopper, an oversight in the design from Maytag but my parts ordered from this company resolved my issue in a timely manner and expense, Even though $62 seemed a tad high for a part known to be under designed, it was much cheaper than a new dishwasher and made of metal, never to fail again, THANKS PARTS SELECT !!!!!!!! YOU SAVED MY DISHPAN HANDS !!!!!! Yip P.S. I saved their website for futher reference since my whole kitchen has Maytag appliances.

Leak

  • Customer: Bonnie J from Duck Creek Village UT
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Pulled of the lower front cover took out the old valve and replace it with the new one. Works like a charm.

Dishes were not coming clean

  • Customer: Philip from Tacoma WA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Dishes were not coming clean and water was not draining from the dishwasher. Put in new part, and problem still existed. Went and bought a new dishwasher. However during the replacement I found the old dishwasher pump was also clogged with old gel packs, and the water hose was clogged with pipe debris. After clearing the pipe buildup, and replacing the dish washer, all is well. I was hoping the repair would have gone better, had I known the pump was clogged beyond repair I would have replaced the dishwasher sooner. The main issue was the clogged water hose, which caused all of the other issues. I would have loved for the $50 in parts to have fixed my existing dishwasher, unfortunately we didn't correct the problem before ruining the old dishwasher, a $350 mistake...

Inlet hose refused to seat on faucet (portable dishwasher).

  • Customer: Victpr from Manhattan KS
  • Difficulty: Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers, Socket set, Wrench set, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
Finally had to remove front foot panel and laminated top. Removed screws on back and one side to get to open cabinet to insert hose properly.

The door latch broke again.

  • Customer: craig from wilmington MA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
This is the 2nd time I replaced the door latch assembly. It's an easy job with the removal of about a dozen torx screws and then using the pliers, I pulled off the two extremely tight electrical connectors. Reassembly is just as simple and easy. No adjustments are needed.

Door won't latch

  • Customer: David from Chesterfield MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed the 10 screws on the inside of the door. Removed the two wires for the switches on both sides of handle. Installed the wires on the new handle. Mounted the hanndle and replaced screws. Easy as that. Total time less then ten minutes.

wheels on lower broken

  • Customer: susan from shady shores TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Removed the broken wheels. Snapped the new wheels on and replaced the basket

Old latch would not open or seal close

  • Customer: Art from Orem UT
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
removed oldlatch put in new one. Took longer to find he curcuit breaker the DW was on.

The wheel axle snapped off so the bottom dishwasher tray didn't close correctly

  • Customer: Norman from Worthington MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
eash as pie. snap them onto the piece of frame on the bottom rack and the problem is solved

dishwasher handle broke

  • Customer: peter from dania beach FL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
had to cut the old one off/out piece by piece and pop the door open and got model number went to web found this supplier ordered it wham next day it was delivered and 20 minutes later shazam.............washing dishes again..............super service...............amazing................ well documented and communicated,,,,,,,,,,,,,,well done.......we all should operate so efficiently

door latch broke

  • Customer: Iris from Chicago IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
took off inside door panel with screw driver(8 screws), unscrewed latch assembly(2 screws) screwed in new assembly:done. It was that easy. part was $25, a repair person quoted me $220. They quoted the part cost at $100.
All Instructions for the DDB1501AWB
331-345 of 367