Models > DCR2111HOM

DCR2111HOM Amana Dishwasher - Overview

Get Parts and Repair Help for DCR2111HOM

If you know the dishwasher repair part you need, you can browse the list of all parts on the DCR2111HOM, or you can search by name or part description. You can also find your part by where it is located on the DCR2111HOM by selecting a section below. We’ve also included any installation videos we have for DCR2111HOM parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$3.27

Heating Element Brass Nut

This nut is sold individually. It is used to install the heating element.

$3.84

CLAMP

$18.45

SCREW

$6.50

WASHER

SILVERWARE BASKET

$22.95

Impeller Kit

This pump impeller and seal kit comes with a spin seal, shims and a guide, but does not come with a mascerator blade. Use it for your D&M design Frigidaire/WCI brand dishwasher.

END CAP, RACK SLIDE

$2.79

WASHER

$43.29

Baffle Plate and Seal

This baffle plate and seal gasket deflects water and keeps it from seeping out of the bottom of your D&M design dishwasher. It fits models with a door measuring 21-3/4 inches wide....

$3.84

NUT

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Water leaking under the dishwasher

  • Customer: Dennis from Tryon NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Wrench(Adjustable)
  • 40 of 42 people found this instruction helpful
I looked under and found that 2 brass nuts that secured the heater element through the base housing of the dishwasher has split down each side of the nut and no longer was tight enough to keep water from leaking around either end of the heater element. I powered down the dishwasher at the circuit breaker and then reached under the dishwasher and pulled away... read more

Water leak underneath dishwasher

  • Customer: Richard from New Orleans LA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers, Wrench(Adjustable)
  • 7 of 8 people found this instruction helpful
Unplugged dishwasher, removed the 2 wires clipped to the heating element, removed both cracked nuts, replaced with new nuts from PartSelect, clipped on wires, plugged in and did a test cycle. Based upon service quote from Best Buy, I saved myself $125.00 for just the call out, not including parts and labor. read more

Dishwasher was leaking

  • Customer: Tony from Lavallette NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 2 of 2 people found this instruction helpful
I turned the power off at the circuit breaker. I then took the access panel off the dishwasher at the bottom. I pulled the wire off the connector. I used a plied to remove the broken washer and replaced with new part. I put everything back in reverse order and ran the dishwasher. I than checked for leaks over two days while the machine was running and e... read more