Quick Question!

Have you ever purchased from PartSelect.com before?

Models > DCR211

DCR211 Maytag Dishwasher - Overview

Parts and Repair Help for models starting with DCR211

If you know the dishwasher repair part you need, you can browse the list of all parts for models starting with DCR211, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for DCR211 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Models starting with DCR211

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.63

Heating Element Brass Nut

The heating element nut is used to connect the heating element to the dishwasher tub. If water is leaking from underneath your dishwasher, you may need to tighten or replace the he...

$25.38

Faucet Adapter

The faucet adapter for your portable dishwasher or washing machine attaches to the faucet and allows you to connect the machine to the tap. Before you install the faucet adapter on your taps, be sure that it fits the coupler on your dishwasher or washer. As per the factory, this is used for faucets with inside or outside threads. For female connection (outside) just remove the washers. This adapter is approximately 1 inch in length, and slightly less than one inch in diameter. This adapter comes with two different thicknesses of rubber washer. You will not need to use both so be sure to determine which thickness works best for your tap before installing it.

$5.67

CLAMP

NUT, SCREW

$428.96

LOWER RACK

This is a lower dishrack assembly for your dishwasher. It slides into place on the lower half of your appliance to hold dishes and other cookware during the dishwashing cycle. This...

$22.83

SCREW

$8.26

WASHER

SILVERWARE BASKET

Impeller Kit

This pump impeller and seal kit comes with a spin seal, shims and a guide, but does not come with a mascerator blade. Use it for your D&M design Frigidaire/WCI brand dishwasher.

END CAP, RACK SLIDE

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Water leaking under the dishwasher

  • Customer: Dennis from Tryon, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Wrench (Adjustable)
  • 65 of 68 people found this instruction helpful
I looked under and found that 2 brass nuts that secured the heater element through the base housing of the dishwasher has split down each side of the nut and no longer was tight enough to keep water from leaking around either end of the heater element. I powered down the dishwasher at the circuit breaker and then reached under the dishwasher and pulled away... read more

I had bought the portable dishwasher from an add in the paper and unfortunately I was unaware that they require faucet adapters and it was not given to me along with the appliance.

  • Customer: Ronald from Chebanse, IL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 26 of 29 people found this instruction helpful
I ordered the part and it fit perfectly!! About five minutes to screw it onto my faucet and problem solved!!! read more

Needed adapter to connect faucet to portable dishwasher

  • Customer: susan from muncie, IN
  • Difficulty: Very Difficult
  • Time to Complete: More than 2 hours
  • Tools Required:
  • 15 of 26 people found this instruction helpful
The adapter still needs another union to fit to the faucet . I have tried Ace Hardware, Lowes, Menards, Danco, Price Pfister and many online plumbing supply and hardware stores and am not able to find a union or combination of unions to fit.
I need an adapter with two 55/64-27 male ends. read more