Quick Question!

Have you ever purchased from PartSelect.com before?

Models > DC24J6A > Parts

DC24J6A Maytag Dishwasher - Parts

All parts for the Maytag Dishwasher DC24J6A

Below is a list of all parts for the Maytag Dishwasher DC24J6A. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the DC24J6A
1-14 of 196
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.02

Screw

This screw is sold individually.

$3.52

Heating Element Brass Nut

The heating element nut is used to connect the heating element to the dishwasher tub. If water is leaking from underneath your dishwasher, you may need to tighten or replace the heating element nut. Replacing the nut is an easy job, does not require any specialty tools, and should not take you more than 10 minutes. For our step by step guide, click the video below. The brass nut measures 7 inches in length x 1 inch in width x 5 inches in height, and fits most dishwashers. To see if this part is compatible with your dishwasher, check the list of compatible brands below.

$25.84

Faucet Adapter

The faucet adapter for your portable dishwasher or washing machine attaches to the faucet and allows you to connect the machine to the tap. Before you install the faucet adapter on...

$5.51

Hose Clamp

The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be careful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.

$3.40

GROMMET

This grommet is used in a number of household appliances. Most often it is used in the dishwasher as part of the assembly that mounts and holds the heating element in place. This r...

$4.63

Heating Element O-Ring

This heating element o-ring is less than an inch in diameter. It is all black in color and is made of rubber.

$5.10

Screw, 8/18 x 3/8

This screw is sold individually.

$4.48

Inlet Hose Washer

This high-pressure inlet hose washer, or gasket, is used with many washing machines, refrigerators, and dishwashers to create a watertight or airtight seal in the appliance. It is black in color, made of rubber, and about 1 inch in diameter. Rubber gaskets can get dry and brittle over time, causing them to lose their integrity and malfunction or crack, which will compromise the seal. It is recommended to check other seals before ordering this part in case they also need to be replaced. This is an OEM part sourced directly from the genuine manufacturer.

$3.00

Frame Screw

Sold Individually.

$10.69

Silicone Adhesive

This adhesive is made specifically to attach dishwasher tine tips (the pointy parts of the dish rack) and door gaskets (when necessary). This adhesive is white silicone and is also known as adhesive caulk. One tube is approximately 3 oz. of product. This adhesive provides a heat-resistant seal between workings. Before applying the adhesive, ensure the surface is clean, dry, and does not have any grease or oil on it. For safety, wear gloves when working with this adhesive to ensure it does not come into contact with your skin.

$3.75

Screw

This screw is sold individually. Size: 8-32 x 1/4 inch.

$3.02

Screw - 6-32 x 5/16

This screw is well under an inch long, and is made of metal.

$27.63

Faucet Adapter Coupling

This part connects the drain hose to the sink.

$18.79

Faucet Adapter Washer

All Parts for the DC24J6A
1-14 of 196