Models > DBXR463EG1WW > Parts

DBXR463EG1WW General Electric Dryer - Parts

All parts for the General Electric Dryer DBXR463EG1WW

Below is a list of all parts for the General Electric Dryer DBXR463EG1WW - ELECTRIC DRYER. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the DBXR463EG1WW
29-42 of 91
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Terminal Block and Grounding Strap

This part is connected to the rear bulkhead of the dryer with screws. It provides a way of connecting individual electrical wires and offers protection of the device from electric...



If you have an older model dryer, the pulley may be pressed on or held on with a set screw. If pulley is pressed on, a new motor pulley must be ordered.


Blower Wheel

This wheel attaches to the motor.


Door Plug - White

Sold individually.




Bias Thermostat

This thermostat is located on the blower wheel.


Timer Resistor


Idler Spring Arm

This part, along with the idler pulley wheel, helps the belt to rotate the drum.


Bearing Retainer

There is a slot in it for a ground strap.


Temperature Control Rotary Switch - 4 Positions

This switch chooses the temperature setting in a dryer.



This screw is sold individually. Size: 10-16x1/2


Safety Thermostat

This is considered a high limit thermostat. Rating - L210 This thermostat acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches a certain point, this piece will shut down power to the heating element.





All Parts for the DBXR463EG1WW
29-42 of 91