Models > DBL333EA1CC > Parts

DBL333EA1CC General Electric Dryer - Parts

All parts for the General Electric Dryer DBL333EA1CC

Below is a list of all parts for the General Electric Dryer DBL333EA1CC - Electric . To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the DBL333EA1CC
1-14 of 89
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$35.66

Rotary Start Switch

This part is used to start the dryer once you have selected a setting on the timer.

$14.09

Rear Bearing

Bearing Only. This part helps your appliance run as quietly as possible.

$47.82

Drum Belt

Used to turn the drum.

$89.28

Rear Bearing Kit

This kit comes with the rear bearing, shaft support, lubricant and other items required for the installation.

$29.04

Drum Glide

Sold individually. There are some dryers that require 2 per dryer. They attach to the outer-most sides of the bearing.

$71.05

Rear Bearing Shaft Support

$64.29

Lower Felt Seal with Adhesive

$59.37

Upper Felt Seal with Adhesive

$13.04

Grounding Ball

$39.93

High Limit Safety Thermostat

This hi-limit thermostat acts as a safety mechanism that keeps the dryer from overheating. With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 260 degrees Fahrenheit. The element will kick back in when the temperature drops to 190 degrees Fahrenheit - the differential of 70 degrees.

$5.98

SCREW-LOCK 10-16X 50

$43.36

Thermal Limiter

This part is found in the same location as the Terminal Block at the back of the Dryer. It acts as a safety device which prevents your appliance from overheating.

$14.30

STRIKE DOOR

$44.20

Control Thermostat

This thermostat controls the internal drying temperature. Cycling themostats continually cycle the heating element off and on to maintain a constant inner temperature. This particular cycling thermostat has a limit of 140 degrees Fahrenheit and a differential of 10 degrees. Meaning that with this thermostat, the heating element will cut out at 140 degrees and cycle back on once the internal temperature drops by 10 degrees.

All Parts for the DBL333EA1CC
1-14 of 89