Models > DA6120

DA6120 Amana Washer - Overview

Get Parts and Repair Help for DA6120

If you know the washer repair part you need, you can browse the list of all parts on the DA6120, or you can search by name or part description. You can also find your part by where it is located on the DA6120 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your washer. We’ve also included any installation videos we have for DA6120 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$28.96

Water Inlet Valve

This part has two ports for water to enter. It is blue and is intended for use with many washing machines and comes with a multi-mount bracket and an outlet adaptor.

$2.70

Hose Clamp

$2.70

Screw

This screw is sold individually.

$3.76

Adjustable Levelling Leg

Sold Individually. This adjustable leveling leg comes with a stop nut.

$2.70

Hose Clamp

This hose clamp is sold individually.

$2.70

Inlet Hose Gasket

$4.46

Rubber Foot Pad

This pad is used for the levelling legs of many washing machines.

$3.82

Screw - 8-18 x 1/2

Sold individually.

$3.82

Nut

$3.82

Screw - 12-14 x 1/2 Type B

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Cold water valve only opened to a trickle

  • Customer: Brian from El Cajon CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Wrench(Adjustable)
  • 105 of 110 people found this instruction helpful
I started by unplugging the appliance and then shut off the hot and cold water faucets then I disconnected and drained the hoses. Next, I removed the two screws that held the valve assembly in place. I then pulled the assembly out about 3 inches and disconnected the two wire plugs. The last step was to loosen the hose clamp on the outlet hose and pull off... read more

Cold water solinoid not opening properly

  • Customer: Erich from EastHampton CT
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 29 of 30 people found this instruction helpful
I moved wash machine away from wall and unplugged from wall outlet. Shut off water, then removed hot and cold water lines from water inlet valve,removed screw from mounting plate and removed valve from wash machine. Checked to see if replacement valve was compatible (exact fit).
Unscrewed the two screws holding valve to mounting plate,unscrewed hose cla... read more

Cold water would not flow into the washer

  • Customer: john from friendswood TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 22 of 26 people found this instruction helpful
After verifying that the supply wasn't the problem, I ordered the replacement inlet valve module.

1) shut off water to machine
2) removed the hose connections from the valve
3) unplugged the washer
4) removed the plate holding the module - 1 screw
5) removed the hose clamp from the valve module to the washer inlet
6) remo... read more