Models > D1471TB1

D1471TB1 LG Dishwasher - Overview

Sections of the D1471TB1

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Hinge Cable – Part Number: 4933DD3001B
Hinge Cable
★★★★★
★★★★★
(27)
PartSelect #: PS3524406
Manufacturer #: 4933DD3001B
This dishwasher door hinge cable assembly connects the door to the spring. The door hinge cable and the door spring apply tension to the door to prevent it from dropping open too quickly. This part co...
$17.90
  In Stock
Roller Assembly – Part Number: 4581DD3003B
Roller Assembly
★★★★★
★★★★★
(13)
PartSelect #: PS3523051
Manufacturer #: 4581DD3003B
The dishwasher roller assembly connects to the dishrack, and is located in the lower level of the dishwasher. It allows the dishrack to easily slide in and out. If the lower rack keeps falling off the...
$7.88
  On Order
Roller with Axle – Part Number: 4581DD3002A
Roller with Axle
★★★★★
★★★★★
(10)
PartSelect #: PS3523050
Manufacturer #: 4581DD3002A
The rack roller and axle in your dishwasher allows the dish rack to slide in and out effectively.If you notice that your dish rack is not performing this function, or if one or more of your rack rolle...
$11.76
  In Stock
Spring,Hinge – Part Number: 4970ED4004G
Spring,Hinge
★★★★★
★★★★★
(2)
PartSelect #: PS3524564
Manufacturer #: 4970ED4004G
The door spring, used in dishwashers, adds tension to the door through the door hinge to keep it from opening too fast. If you have a door latch failure or your washer door drops too quickly when open...
$17.40
  In Stock
Door Gasket - Black – Part Number: 3920DD3005A
Door Gasket - Black
★★★★★
★★★★★
(9)
PartSelect #: PS3522654
Manufacturer #: 3920DD3005A
This is a door gasket for a dishwasher. It creates a watertight seal between the dishwasher door and tub to prevent leaking while the appliance is in use. The gasket is approximately 76 inches long an...
$53.41
  In Stock
Diverter Motor - 120V 60Hz – Part Number: 4681ED3001D
Diverter Motor - 120V 60Hz
★★★★★
★★★★★
(6)
PartSelect #: PS3579323
Manufacturer #: 4681ED3001D
This diverter motor, or stepper motor, controls the movement of the spray arms in your dishwasher. It directs water between the drain pump and the spray arms by turning a check valve inside the pump, ...
$40.42
  In Stock
Dishwasher Drain Hose – Part Number: AEM69493808
Dishwasher Drain Hose
★★★★★
★★★★★
(8)
PartSelect #: PS11760658
Manufacturer #: AEM69493808
This corrugated drain hose assembly directs wastewater from your dishwasher to the household drainage system. Positioned at the rear of the unit, it connects the pump to the sink drain or garbage disp...
$73.65
  In Stock
LOCKER ASSEMBLY – Part Number: 4027ED3002J
LOCKER ASSEMBLY
★★★★★
★★★★★
(5)
PartSelect #: PS5574492
Manufacturer #: 4027ED3002J
$63.25
  In Stock
Dishwasher Water Inlet Valve – Part Number: 5221DD1001E
Dishwasher Water Inlet Valve
★★★★★
★★★★★
(2)
PartSelect #: PS8769826
Manufacturer #: 5221DD1001E
This part is the replacement inlet valve for your dishwasher. It is approximately 4-1/2 inches by 3-1/2 inches. The water inlet valve in your dishwasher connects to the water source and solenoid wire...
$99.29
  In Stock
TOP MOUNT BRACKETS – Part Number: 5001DD4001B
TOP MOUNT BRACKETS
★★★★★
★★★★★
(4)
PartSelect #: PS3655985
Manufacturer #: 5001DD4001B
$37.94
  In Stock
RACK ASSEMBLY – Part Number: AHB32983761
RACK ASSEMBLY
★★★★★
★★★★★
(3)
PartSelect #: PS7788835
Manufacturer #: AHB32983761
$218.08
  In Stock
Casing Assembly – Part Number: ABT35083801
Casing Assembly
★★★★★
★★★★★
(1)
PartSelect #: PS3530838
Manufacturer #: ABT35083801
$119.56
  In Stock

Questions And Answers for D1471TB1

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the D1471TB1

[Viewing 7 of 7]
Door latch failure
Fixed by
these parts
Fixing Fixing Fixing
Show All
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Not cleaning dishes properly
Fixed by
these parts
Fixing
Show All
Will not dispense detergent
Fixed by
these parts
Fixing
Show All
Not draining
Fixed by
these parts
Fixing
Show All
Will not fill with water
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken door spring allows the door to overextend to the floor if not propped.
Simple, removed screws securing machine in the cabinet, then pull the unit out of the cabinet space about 10 inches. Springs are accessible within this extension. You need strong hands to extend the springs and attach them. Once attached, push machine back in place and re-install the anchor screws. In my situation, only one spring was broken, so the attached side revealed the correct slot to place the hook on the top position, the bottom position has a plastic lead for the spring, and that lead is attached to a rope to the door hinge. Note: Replace BOTH springs, even if only one is broken.
Parts Used:
Spring,Hinge
  • Gregory L from INDEPENDENCE, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
27 of 31 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door spring connector
Pull the dishwasher out from underneath the countertop took 2 minutes unscrewed the panel on the side one minute put the connector on one minute screwed the panel back on 1 minute put the dishwasher back underneath the counter two minutes very easy job
Parts Used:
Hinge Cable
  • Thomas from Palm coast, FL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door was very heavy due to spring problem
Turn off the power at breaker box. Disconnect the power at dishwasher since I needed to pull the unit all the way out of the cabinet to get to screws on the back side for this model. Find and remove the screws to the cover. Remove cover. In my case, the rope on the connector assembly had snapped. I replaced spring and connector identically to functioning side. Did need a pair of pliers to provide enough tension on spring to install. Reconnected cover and power and moved back into the cabinet. Easy repair and my wife wondered why I hadn't done it sooner.
Parts Used:
Spring,Hinge Hinge Cable
  • Greg S from BELLE ISLE, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!