Quick Question!

Have you ever purchased from PartSelect.com before?

Models > CYE3005AKW

CYE3005AKW Magic Chef Dryer - Overview

Get Parts and Repair Help for CYE3005AKW

If you know the dryer repair part you need, you can browse the list of all parts on the CYE3005AKW, or you can search by name or part description. You can also find your part by where it is located on the CYE3005AKW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for CYE3005AKW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$18.75

Door Switch Kit

This part replaces older two terminal switches.

$16.63

Door Catch Kit

This kit comes in two pieces: the catch and the clip.

$24.69

Blower Wheel

Part may differ in appearance, but functions same as original part.

$68.06

Lint Duct Assembly

This part includes the upper and lower air duct assembly and lint screen.

$10.25

Screw & Fastener Kit - Front Panel

$7.40

Door Strike Bracket

$32.54

HOUSING- B

$4.63

CLIP- FRON

$5.94

SEAL- BLOW

$70.98

SEAL LIN

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Drum not centered , clothes getting stuck in dryer

  • Customer: Chris from Hopedale, MA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 486 of 492 people found this instruction helpful
The first thing I did was to unplug the dryer from the wall. Then I removed the bottom two screws and slid the bottom cover off so i could see all the way to the back, I tipped the dryer back against the wall and searched for the problem with a flashlight. I noticed that one of the guide wheels that held the drum in place was sheared off. I took the new d... read more

The Felt Gasket between drum and door ripped, vent manifold from Dryer to fan and lint screen broken

  • Customer: Tim from South Glens Falls, NY
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 477 of 480 people found this instruction helpful
I pulled the bottom panel and the door panel to replace the manifold and felt gasket around the drum. I removed old gasket very easily, it peeled right off. I use brake cleaning fluid (Spray Can from Auto Zone about $1.45) to remove old glue. Used spray contact cement (Elmer's about 4.50 at Ace) and sprayed the panel and gasket surfaces and let dry. I th... read more

Squeeling and grinding noise

  • Customer: Steven from Holderness, NH
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers, Socket set
  • 424 of 429 people found this instruction helpful
Wasn't the belt!! Changed it anyway. Should have come here earlier. That mistake added several days to the repair waiting for a second batch of the right parts. Became a pro at taking the dryer apart and reassembling, though! Easy job, just take your time and mark your wires, if you need to.
Followed other people's excellent instructions. Clean out al... read more