Models > CX8670TB

CX8670TB Maytag Cooktop - Overview

Get Parts and Repair Help for CX8670TB

If you know the cooktop repair part you need, you can browse the list of all parts on the CX8670TB, or you can search by name or part description. You can also find your part by where it is located on the CX8670TB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. We’ve also included any installation videos we have for CX8670TB parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the CX8670TB [Viewing 2 of 2]

$75.89

Surface Element with Limiter - 6" - 1200W

$16.36

Surface Burner Knob

Sold individually. This knob accepts a D-shaped shaft.

$2.77

Screw - sold individually

$106.18

Surface Element - 2200W

$8.44

USE MCN TJ114

$2.70

Screw

This screw is sold individually.

$60.64

Surface Element Kit with Limiter - 6"

This ceramic element kit comes with an overheat limit switch, two wires, and two wire connectors.

$69.50

Surface Burner Element with Limiter - 6"

$3.59

Appliance Scraper

Use this scraper for your ceramic/glass cooktop. It has a retractable blade and is an all-purpose tool for cooktops, mirrors, windows and tile. Use it to also remove paint, paper...

$113.75

Burner Element with Limit Switch - 8"

Common Symptoms of the CX8670TB [Viewing 1 of 655]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Right rear burner went bad

  • Customer: Mark from Loxahatchee FL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 55 of 60 people found this instruction helpful
Turned the breaker off, I removed 2 screws securing the range top to the range, opened the top and secured it in the up position, Removed the 2 screws securing the element ,one at a time I swapped the quick connectors from the old element to the new and repeated the process in reverse. I save over $100.00 in labor, plus most companies get you for a trip char... read more

glass cooktop element stopped working

  • Customer: Mark from mckinney TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Socket set
  • 18 of 20 people found this instruction helpful
3 months after my 5 year warranty ran out, one of the elements on my wife's maytag cooktop "popped". I was curious to see if I could fix it myself and ran across partselect.com via google. Their step by step instructions for determining the source of the problem (i.e. either the element or the control was bad) led me to realize that the element was bad. I... read more

Stovetop element burned out

  • Customer: Lonnie from Ashton ID
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 14 of 16 people found this instruction helpful
First of all, I shut off the electricity to the stove.

I had to remove the two screws holding the stovetop in place. I then lifted it up and braced it to keep it from falling, removed the bad element, carefully marking the 4 wires that were connected to the element. I then disconnected the wires, and removed the two brackets holding the elemen... read more