Quick Question!

Have you ever purchased from PartSelect.com before?

Models > CWG301

CWG301 Maytag Wall Oven - Overview

Get Parts and Repair Help for CWG301

If you know the wall oven repair part you need, you can browse the list of all parts on the CWG301, or you can search by name or part description. You can also find your part by where it is located on the CWG301 by selecting a section below. We’ve also included any installation videos we have for CWG301 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$22.22

2 Piece Broiler Pan

The top of this part is now black.

$35.07

SEAL- DOOR

This oven door seal is seventeen and a half inches long. It is made of rubber and has a metal hook on either end to hold it in place. This seal sits on top of the glass window pane.

$2.80

Frame Screw

Sold Individually.

$35.73

Push Button Light Switch - White

As per the manufacture the white switch is no longer available and only available in black.

$8.65

Light Bulb Socket

This light bulb socket is located inside the oven cavity.

$19.22

Anti-Tip Screw

Sold individually.

$2.80

Screw - 6-32 x 5/16

This screw is well under an inch long, and is made of metal.

$34.20

Door Side Seal

Sold individually. Order quantity required.

$3.13

Nut

$2.80

Screw

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Light Switch Was Broken

  • Customer: REY from GAINESVILLE, TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 10 of 14 people found this instruction helpful
I removed screws that hold cover and put cover aside. I removed the buttons and removed glass cover. I pulled panel out far enough t get tswitch wires and installed switch. Be very careful not to let wires touch metal. read more

The old light switch was broken

  • Customer: James from Charleston, AL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 3 of 5 people found this instruction helpful
The replacement switch was slightly larger than the old one so it would not go through the hole in the front panel so I had to get a reaming tool and enlarge the hole just a little for the switch to go through. It was still an easy repair as I had the proper tool. read more

old bulb fused into old socket.

  • Customer: Michael from Reno, NV
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 2 of 7 people found this instruction helpful
removed old socket and replaced.
I was VERY pleased with Partselect. Easy to find part, it was in stock and fast delivery. read more