Models > CWE6230ADB

CWE6230ADB Maytag Oven - Overview

Get Parts and Repair Help for CWE6230ADB

If you know the oven repair part you need, you can browse the list of all parts on the CWE6230ADB, or you can search by name or part description. You can also find your part by where it is located on the CWE6230ADB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your oven. We’ve also included any installation videos we have for CWE6230ADB parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.82

Light Bulb - 40W

Sold individually.

$2.70

Screw

This screw is sold individually.

$2.70

Screw

$2.70

Screw

This screw is sold individually.

$19.30

2 Piece Broiler Pan

$51.93

Door Seal

This oven door seal prevents heat from escaping the oven cavity when in use.

$2.70

Screw

This screw is sold individually.

$38.48

Oven Rack

Sold individually.

$42.04

Broil Element

$56.13

Oven Rack

Sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The oven door seal was ripped and was leaking.

  • Customer: Paul from Mickleton NJ
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 31 of 32 people found this instruction helpful
The oven seal replacement was very straight forward. Two screws held the door to the arms coming from the oven. I slid the door up off the arm and moved it to a workbench. This whole process should take about 15 minutes, a little longer if your unit is older and you want to clean as you go. Mine was fairly dirty and I gave it a cleaning as I removed part... read more

Clock and timer unit not working after lighting storm

  • Customer: David from Plainfield IN
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 6 of 9 people found this instruction helpful
Removed 4 screws under the top unit that holds the stove control knobs. Open oven door for better view. Tilt whole unit (width of stove) up and out of top flange. Remove knobs for timer and the two control knobs (that operate the range burners) nearest the clock. Take out the screws by these knobs, 2 per knob and then you can get the frame that holds clo... read more

Oven door latch was bent and did not release or lock

  • Customer: Roy from Morgantown WV
  • Difficulty: Easy
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 6 of 9 people found this instruction helpful
Had to disassemble the top of the stove and the control panel on the front. I took digital pictures as I disassembled so I could refer to them when putting the stove back together, especially when disconnecting wiring. It took about 3 hours, but most of that time was spent thoroughly cleaning 16 years of baked on grease from places that are normally unacce... read more