Quick Question!

Have you ever purchased from PartSelect.com before?

Models > CWE4020ACB

CWE4020ACB Maytag Wall Oven - Overview

Get Parts and Repair Help for CWE4020ACB

If you know the wall oven repair part you need, you can browse the list of all parts on the CWE4020ACB, or you can search by name or part description. You can also find your part by where it is located on the CWE4020ACB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your wall oven. We’ve also included any installation videos we have for CWE4020ACB parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

$46.44

Bake Element (16" long x 16" wide)

This spade style bake element with push on wire terminals is 16 inches wide. It has a terminal depth of three inches and a total element length of nineteen inches. This element comes with an instructions sheet and is intended for use with electric ovens.

$22.22

2 Piece Broiler Pan

The top of this part is now black.

$2.87

Screw (4)

Sold Individually.

$35.07

SEAL- DOOR

This oven door seal is seventeen and a half inches long. It is made of rubber and has a metal hook on either end to hold it in place. This seal sits on top of the glass window pane

$37.41

Oven Rack

Sold individually.

$2.80

Frame Screw

Sold Individually.

$5.68

Thermostat Clip

This clip is used to secure the thermostat bulb. They are sold individually.

$35.73

Push Button Light Switch - White

As per the manufacture the white switch is no longer available and only available in black.

$34.51

Oven Door Seal

This oven door seal is fifteen and a half inches long. It is made of rubber and has a metal hook on either end to hold it in place. This seal sits on top of the glass window pane.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

bottom heating element in oven disintegrated

  • Customer: DENISE from GERMANTOWN, TN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 43 of 46 people found this instruction helpful
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. I threw away the old pieces.

Then I connected the two wires on the new element. I pushed the wires back in the insulation in the wall of the cabinet. Then I inserted the two screws and tightened them in.read more

Oven heating element blew out

  • Customer: Shirley from Dallas, TX
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 18 of 21 people found this instruction helpful
Removed 2 screws, pulled element out. My husband used an ohmmeter to see if the electricity needed to be turned off. It showed no voltage. He could not remove electrical connectors by hand, so he used insulated pliers. When he touched the connectors, a shower of sparks covered the inside of the oven and tripped the breaker switch. Then we noticed the pl... read more

Light Switch Was Broken

  • Customer: REY from GAINESVILLE, TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 10 of 14 people found this instruction helpful
I removed screws that hold cover and put cover aside. I removed the buttons and removed glass cover. I pulled panel out far enough t get tswitch wires and installed switch. Be very careful not to let wires touch metal. read more