Models > CVG4380B > Instructions

CVG4380B Jenn-Air Cooktop - Instructions

All installation instructions for CVG4380B parts

These instructions have been submitted by other PartSelect customers and can help guide you through the cooktop repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the CVG4380B
61-75 of 89
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Needed to replace the grease filter!

  • Customer: Colette from Annapolis MD
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 2 people found this instruction helpful
Followed the directions. Piece of cake!!

old yucky filter

  • Customer: Diane from Flower Mound TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 2 people found this instruction helpful
Thanks, have been looking for a replacement for this dinosaur filter forever. It is great!

The stovetop gas regulator kept clicking in off position.

  • Customer: Preben from Fox River Grove IL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 1 of 5 people found this instruction helpful
The spare part came within two days after I place the order on line. I drew a simple wire diagram of the faulty switch-regulator. Shut off the power to the stovetop, before removing the four terminals on the faulty switch-regulator. I pushed the old regulator up from the center pin and replaced it with the new regulator. The next step was to reinstall the four wire terminals using my wire diagram. Final step was to turn the power back to the stovetop and test the new switch-regulator.

Intermittent but rare spark when I went to start the rage: spark module definitely was toast or on its way out

  • Customer: Bronius from College Station TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 4 of 15 people found this instruction helpful
The trickiest part was locating the elusive spark module. I am not certain I took the best route, but not considering all the wrong routes in trial and error, it was the most expedient. Certainly there must have been a single something to remove to get to this frequently faulted part..

Anyhow, thanks to the great part, the stove works really well again.

fan motor seized

  • Customer: Vernon from Evergreen CO
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Socket set
  • 1 of 6 people found this instruction helpful
Replaced motor. 2 screws, 5 wires, 8 nuts, done.

defetive fan switch

  • Customer: john from Ironton OH
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 3 people found this instruction helpful
throw breaker, unbolt switch, unplug leads, rerplace switch, bolt in place, reattach leads, turn breaker back on

NEED KNOBS FOR ELECTRIC STOVE-TOP

  • Customer: JUDY from HACIENDA HEIGHTS CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I DID NOT HAVE THE MODEL NUMBER AND THOUGHT I PICKED THE CORRECT KNOB BY THE PICTURE. I SENT BACK THE KNOBS AND ONE OF MY KNOBS TO SEE IF THE COMPANY CAN MATCH.

one of my Jenn Air knobs melted (gas range top)

  • Customer: Gayle from Whitefish MT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
pried off the old knob with hubby's needle nosed Leatherman pliers and popped the new one on!

Holes in the air filter of our Jenn-Air grill

  • Customer: Janice from Ocala FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Simply pulled the old filter out and put the new filter in.

Broke original Knob

  • Customer: Robert from Tracy CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Hardest part of repair was ordering part. The knob arrived the day after my placing order. Not rocket science to replace burner knob.

Replacement of a Dead Spark Module

  • Customer: Cor F. from Pasadena TX
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
The spark module pulses a stepped up voltage to all four burner sparks at the same time regardless of which burner you want to ignite. I read that this part lasts about 10 years. I don't cook much and it lasted 13 years. On my Magic Chef the part is behind the right side wall panel. Lift the range top,remove all the screws that hold the right side panel in place. This replacement can done without opening any gas fittings.

Replacement

  • Customer: Barb from Holladay UT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
This down draft filter was just what I was looking for. The big box stores (Home Depot and Lowe's) do not carry this size filter. Thanks,

Burner knob replacement

  • Customer: Peter from Foster City CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Inserted new knob on to the stem... very difficult operation taking a great amount of skill. ;-)

Filter was very old and falling apart.

  • Customer: June S from San Antonio TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
The grease filter was 20+ yrs old and the mesh was falling of the frame. I was very pleased to find this replacement filter (the first filter I received was damaged....placed a call to PartSelect and have a new one the next day). Can't beat service like that!! Thank you, June Patten

Range burner melted plastic jar and became clogged

  • Customer: Harry from Cambria CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
Found the part number on an old box, ordered the part and it arrived next day. Installed easily and is working perfectly.
All Instructions for the CVG4380B
61-75 of 89