Models > CVEX4100W

CVEX4100W Jenn-Air Cooktop - Overview

Get Parts and Repair Help for CVEX4100W

If you know the cooktop repair part you need, you can browse the list of all parts on the CVEX4100W, or you can search by name or part description. You can also find your part by where it is located on the CVEX4100W by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$16.19

Grease Filter

This grease filter is made of aluminum and is intended for use with downdraft ranges and cooktops. Sold individually.

$41.66

USE WPL 703650

$2.70

Screw

This screw is sold individually.

$2.70

Screw

This screw is sold individually.

$59.60

Fan Switch

This switch controls the speed of the fan.

$87.14

Single Grill Grate

$4.46

Fan Switch Grommet

This grommet is located under the fan switch.

$62.82

Grill Element

$21.63

Burner Cartridge Terminal Block

No spades or wiring come with this part. To order the spades or wiring, please research by model# of appliance.

$20.79

Drain Jar

This jar is used for collecting the grease drippings of gas ranges.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Burner had one temperature--hot, regardless of setting

  • Customer: James H from Oxford NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 47 of 50 people found this instruction helpful
1. Killed power and removed the regulator's knob, noted the position of the old control.
2. Took off the cover for the center vent and loosened the two screw holding the housing in place--the screws didn't have to come out completely as it is a U-shaped friction hold.
3. Unscrewed the two screws holding the old control switch in place--lifted the h... read more

Burner Control not Functioning

  • Customer: Randall from Mohnton PA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 16 of 18 people found this instruction helpful
Simple Repair!
Turn off Power
Remove four screws under panel.
Remove old burner knob.
Drop Burner Panel from range
Remove 5 wire connectors from old burner control
with pliers
Remove 2 screws that held burner control to range
panel
Install new burner control
Rplace two screws to burner control
Replac... read more

The Exhaust fan would not shut off

  • Customer: Michael from Plano TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 9 of 11 people found this instruction helpful
I looked up the part on the web site and ordered it. When it arrived, I unscrewed the control face plate and got access to the switch. The new switch did not match the old one. I called Jenn- Air parts, and they said it was the correct one. although the switch looked different. (The old one looked like it had 4 connections. After closer look, it had three co... read more