Quick Question!

Have you ever purchased from PartSelect.com before?

Models > CVE1400W Maytag

CVE1400W Jenn-Air Cooktop - Overview

Get Parts and Repair Help for CVE1400W

If you know the cooktop repair part you need, you can browse the list of all parts on the CVE1400W, or you can search by name or part description. You can also find your part by where it is located on the CVE1400W by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. We’ve also included any installation videos we have for CVE1400W parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$8.90

Surface Burner Receptacle Kit

This kit comes with one ceramic block, metal bracket, wires, and hi-temp wire nuts.

$35.44

Drip Bowl Kit - Light Gray

This is a kit of 4 drip bowls - Two 6" and two 8". All pans have holes in the bottom and they are light gray in color.

$10.76

Urethan Foam Gasket

$62.73

Fan Relay Switch

$4.94

BAND-MOTOR

$4.94

Screw

This screw is sold individually.

Fan Switch - Black ONLY

At 125 volts, this switch will allow for six amps, and at 250 volts, it will allow for 3 amps. Regardless of the voltage used, this switch still operates at 1/4 horsepower.

Push Nut

This push nut is well under an inch in diameter. It is made entirely of metal.

Air Inlet Grill - white

This air inlet grill is just under fifteen inches long. It is all white in color and is made of plastic. This grill is five inches wide.

CLIP

This wiring clip is an inch long, and is made entirely of metal. This clip is used with ranges and cooktops.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

replaced filter

  • Customer: ELOISE from MILFORD, OH
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 468 of 475 people found this instruction helpful
pulled old one out , cleaned the area & replaced with the new one. read more

Old grease filter that I actually did not know I had to change

  • Customer: deborah from fort pierce, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 441 of 521 people found this instruction helpful
Removed the old grease screen and cleaned the entire area thoroughly and replaced the screen read more

Stove top element not working due to bad receptacle.

  • Customer: Richard from Carthage, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 137 of 148 people found this instruction helpful
Turned off the power at the breaker box, cut the wires approximately 5 inches from the bad receptacle and removed it after removing one screw. Stripped back the wires about 1/2 inch and attached the new wires with the ceramic wire nuts provided and secured the receptacle back in place with the new screw provided in the kit.
My sister's husband wanted to... read more