Quick Question!

Have you ever purchased from PartSelect.com before?

Models > CTX21EAXFRAD

CTX21EAXFRAD Hotpoint Refrigerator - Overview

Get Parts and Repair Help for CTX21EAXFRAD

If you know the refrigerator repair part you need, you can browse the list of all parts on the CTX21EAXFRAD, or you can search by name or part description. You can also find your part by where it is located on the CTX21EAXFRAD by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for CTX21EAXFRAD parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.07

Light Bulb - 40W

Sold individually.

$3.35

SWITCH LIGHT

$22.33

Run Capacitor

This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.

$30.92

Vegetable Drawer Slide Rail - Right Side

$30.92

Vegetable Drawer Slide Rail - Left Side

$13.38

Package of 12 Screws

$2.72

SCR 10-16 AB PNT20 1/2 S

Sold Individually.

$17.86

Door Shelf Retainer Bar End Cap - Left or Right Side

This end cap can be used for the right or left side of the refrigerator door shelf or the freezer door shelf.

$2.43

Shelf Support

Sold individually.

$18.67

Overload Switch

This part helps protect the motor from overheating.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Sticking Light Switch

  • Customer: Jonathan from Lilburn, GA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 75 of 87 people found this instruction helpful
I applied some tips learned by reading other reviews. So before I started I grabbed my trusty vise grip pliers and a small screw driver. I locked onto the switch actuator, the part that the refrigerator door pushes in, with the vise grips and pulled on it just hard enough to get the screw driver inserted in the right side to push in the catch clip so the swi... read more

Relay

  • Customer: John H from Austin, TX
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 34 of 43 people found this instruction helpful
Removed back panel. Opened cover to relay attached to the compressor and pulled off replacing with new relay. No problem.

Better than paying $250 for someone else to do it. read more

Noisey fan/motor (bad motor bearing ?)

  • Customer: Keith from Fort Worth, TX
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 28 of 33 people found this instruction helpful
Removed 2 phillips head screws to remove ice maker (could have just loosened them)
Pulled fan off of shaft
Removed 2 phillips head screws on motor bracket , disconnected three motor wires & removed motor.
reversed process to install new motor & fan blade.
Space was a little tight for two hand and arms, but do-able. read more