Models > CTX18DABLRWW

CTX18DABLRWW General Electric Refrigerator - Overview

Get Parts and Repair Help for CTX18DABLRWW

If you know the refrigerator repair part you need, you can browse the list of all parts on the CTX18DABLRWW, or you can search by name or part description. You can also find your part by where it is located on the CTX18DABLRWW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for CTX18DABLRWW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.52

Light Bulb - 40W

Sold individually.

$14.74

Door Shelf Retainer Bar End Cap - Left or Right Side

This end cap is sold individually. It can be used for the right or left side of either the freezer or refrigerator door shelves.

$11.93

Package of 12 Screws

$27.55

Vegetable Drawer Slide Rail - Right Side

$18.25

Door Shelf Retainer Bar

$27.55

Vegetable Drawer Slide Rail - Left Side

$1.94

SCR 8-18 CA HX 1/2 S

$2.66

SCR 10-16 AB PNT20 1/2 S

$14.54

Fill Tube Grommet

This fill tube grommet is used on the icemaker.

$67.82

Fresh Food Door Gasket

This white fresh food door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Sticking Light Switch

  • Customer: Jonathan from Lilburn GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 35 of 39 people found this instruction helpful
I applied some tips learned by reading other reviews. So before I started I grabbed my trusty vise grip pliers and a small screw driver. I locked onto the switch actuator, the part that the refrigerator door pushes in, with the vise grips and pulled on it just hard enough to get the screw driver inserted in the right side to push in the catch clip so the swi... read more

Door Retainer Bar and End Caps were missing

  • Customer: Angela from Minneapolis MN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 16 of 18 people found this instruction helpful
Placed bar into end caps and slide end caps into slots in the door. Took about 1 minute! Very easy! read more

fridge was warm

  • Customer: ELLIS from LEANDER TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 25 of 47 people found this instruction helpful
first remove the one screw holding the cover over the defrost timer, grasp the timer and unplug from the male plug end. insert the new timer. replace the cover and the one screw. plug in the fridge enjoy.
my old fridge was 30 years old and i had to replace the timer many times. read more