Models > CTX18DABLRAA

CTX18DABLRAA Hotpoint Refrigerator - Overview

Get Parts and Repair Help for CTX18DABLRAA

If you know the refrigerator repair part you need, you can browse the list of all parts on the CTX18DABLRAA, or you can search by name or part description. You can also find your part by where it is located on the CTX18DABLRAA by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for CTX18DABLRAA parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.58

Light Bulb - 40W

Sold individually.

$16.91

Door Shelf Retainer Bar End Cap - Left or Right Side

This end cap is sold individually. It can be used for the right or left side of either the freezer or refrigerator door shelves.

$3.28

SWITCH LIGHT

$19.79

Door Shelf Retainer Bar

$29.25

Vegetable Drawer Slide Rail - Right Side

$12.17

Package of 12 Screws

$5.34

Light Socket

$1.88

SCR 8-18 CA HX 1/2 S

$29.25

Vegetable Drawer Slide Rail - Left Side

$2.57

SCR 10-16 AB PNT20 1/2 S

Sold Individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Sticking Light Switch

  • Customer: Jonathan from Lilburn GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 49 of 54 people found this instruction helpful
I applied some tips learned by reading other reviews. So before I started I grabbed my trusty vise grip pliers and a small screw driver. I locked onto the switch actuator, the part that the refrigerator door pushes in, with the vise grips and pulled on it just hard enough to get the screw driver inserted in the right side to push in the catch clip so the swi... read more

Door Retainer Bar and End Caps were missing

  • Customer: Angela from Minneapolis MN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 25 of 28 people found this instruction helpful
Placed bar into end caps and slide end caps into slots in the door. Took about 1 minute! Very easy! read more

Noisey fan/motor (bad motor bearing ?)

  • Customer: Keith from Fort Worth TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 20 of 24 people found this instruction helpful
Removed 2 phillips head screws to remove ice maker (could have just loosened them)
Pulled fan off of shaft
Removed 2 phillips head screws on motor bracket , disconnected three motor wires & removed motor.
reversed process to install new motor & fan blade.
Space was a little tight for two hand and arms, but do-able. read more