Models > CTX16CAXGRWH

CTX16CAXGRWH General Electric Refrigerator - Overview

Get Parts and Repair Help for CTX16CAXGRWH

If you know the refrigerator repair part you need, you can browse the list of all parts on the CTX16CAXGRWH, or you can search by name or part description. You can also find your part by where it is located on the CTX16CAXGRWH by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for CTX16CAXGRWH parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the CTX16CAXGRWH [Viewing 3 of 3]

$2.58

Light Bulb - 40W

Sold individually.

$43.23

Crisper Drawer Cover

This cover has the drawer slides built into it.

$17.18

Retainer Bar End Cap - Left or Right Side

Sold individually.

$3.62

SWITCH LIGHT

$9.27

Door Shelf Retainer Bar End Cap

$15.48

Front Door Shelf Retainer Bar

End caps sold separately.

$47.63

Defrost Timer

This defrost timer will cycle for twenty-five minutes after every six hours of run time. The timer itself is made of plastic, and its terminals are bent, the leads are internal, an...

$12.17

Package of 12 Screws

$64.71

Stationary Wire Shelf

$5.34

Light Socket

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Vegetable pan cover broke down the middle

  • Customer: Kim from Bronx NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 44 of 46 people found this instruction helpful
When the cover came to my apartment, I crossed my fingers that the piece would fit . Well, within 5 minutes the old cover was out and the new cover in. And it looks better than new! Finally, I don't have to hold my vegetable drawers up with a D battery! read more

Sticking Light Switch

  • Customer: Jonathan from Lilburn GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 40 of 45 people found this instruction helpful
I applied some tips learned by reading other reviews. So before I started I grabbed my trusty vise grip pliers and a small screw driver. I locked onto the switch actuator, the part that the refrigerator door pushes in, with the vise grips and pulled on it just hard enough to get the screw driver inserted in the right side to push in the catch clip so the swi... read more

FREEZER & FRIG WERE NOT COLD

  • Customer: Sam from Cooper City AL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 35 of 53 people found this instruction helpful
First I removed the rear cover, located at the bottom of the refrigerator. Then I cleaned out the dirt & dust on and around the compressor. The relay has a cover, that is secured with a spring loaded clip. To release the clip, push in with your fingers, while disengaging the end clip with a screwdriver. Once one side is off the other lifts off. Remove c... read more