Quick Question!

Have you ever purchased from PartSelect.com before?

Models > CTF1722ARW

CTF1722ARW Magic Chef Refrigerator - Overview

Get Parts and Repair Help for CTF1722ARW

If you know the refrigerator repair part you need, you can browse the list of all parts on the CTF1722ARW, or you can search by name or part description. You can also find your part by where it is located on the CTF1722ARW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for CTF1722ARW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

Order within the next 12 hrs and your part ships today!
$97.39

Replacement Ice Maker

NOTE: This replacement ice maker mechanism does NOT come with a cover,shut off arm, a wire harness, or the mounting hardware. Must be ordered separately.

Order within the next 12 hrs and your part ships today!
$40.25

Condenser Fan Motor Kit

This condenser fan motor operates in a clockwise fashion and carries carries 2W and 115V. It comes with screws, a mounting nut for the blade and a cushion. This part provides forc...

Order within the next 12 hrs and your part ships today!
$19.60

Crisper Pan Rail - Right Side

Order within the next 12 hrs and your part ships today!

Ice Lever Adjuster

$63.67

Fresh Food Door Handle Kit

This kit comes with the handle in white, screws and screw covers. Note: If your door has been reversed so the handle is on the right side, this handle becomes the freezer handle. Use freezer handle if your refrigerator hand is on the right side

Order within the next 12 hrs and your part ships today!
$4.89

Crisper Pan Rail - Left Side

Order within the next 12 hrs and your part ships today!
$50.93

Freezer Door Handle Kit

This kit comes with the handle in white, screws and screw covers. Note: If your door has been reversed so the handle is on the right side, this handle becomes the refrigerator handle.

Order within the next 12 hrs and your part ships today!
$5.41

Upper Hinge Shim

This upper hinge shim is just under two inches long. It is beige in color and is made of a thick paper. This shim is intended for use with refrigerator hinge assemblies.

Order within the next 12 hrs and your part ships today!
$30.23

Dairy Door

Order within the next 12 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Icemaker producing few or no cubes and often leaving "kling-ons" on ice tray

  • Customer: Bernie from Diamond Bar, CA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 661 of 697 people found this instruction helpful
Interior surface of ice tray felt rough & flaky (coating deteriorated) so cubes would not release.
Unplug appliance.
Remove timer cover by hand pressure @ edge.
Remove single attachment screw & bracket at lower front of icemaker.
Disconnect wiring harness from socket @ rear of compartment.
Tricky part was determining what type of con... read more

Water overflowed ice maker turnning ice bucket into solid mass of ice

  • Customer: Harry from Grand Ledge, MI
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 243 of 316 people found this instruction helpful
My ice maker has been shedding its non-stick coating for over a year. Within the last month of so, it started pouring water into the ice bucket below, turning it into a solid mass of ice. So I purchased a new ice maker assembly. I encountered two problems not mentioned in the 21 or so do-it-yourselfer repair stories that precede this one. First problem: o... read more

Sometimes the condenser fan would start causing the refrigerator to overheat.

  • Customer: Tom from Franklin, WI
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 121 of 129 people found this instruction helpful
Unplug the appliance.
Removed the screws holding the back panel.
Removed the fan blade.
removed 3 screws holding the condenser fan.
Remove the 3 metal brackets attached to the fan.
(First note which studs the brackets are attached to. Attach the 3 metal brackets to the new fan. (New screws were supplied)
Cut and strip the wire a... read more