Models > CTF140ES0

CTF140ES0 Frigidaire Washer - Overview

Get Parts and Repair Help for CTF140ES0

If you know the washer repair part you need, you can browse the list of all parts on the CTF140ES0, or you can search by name or part description. You can also find your part by where it is located on the CTF140ES0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your washer. We’ve also included any installation videos we have for CTF140ES0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$74.05

Door Lock and Switch Assembly

NOTE: As per the manufacture, some models require a new wire harness and a door strike for this door lock assembly to work on the appliance. The original style lock would require t...

Order within the next 11 hrs and your part ships today!
$7.21

Door Strike

Use with front load washers.

Order within the next 11 hrs and your part ships today!
$30.65

Shock Absorber Kit

This kit is used for front load washers and includes 2 dual-stage shock absorbers, 1 spare shock mounting pin and 4 locking nuts. These shock absorbers keep the washer from vigorou...

Order within the next 11 hrs and your part ships today!
$17.91

Water Inlet Valve

This washing machine water inlet valve has two ports for water to enter.

Order within the next 11 hrs and your part ships today!
$101.98

Drain Pump - 60Hz 120V

This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time.

Order within the next 11 hrs and your part ships today!
$27.71

Single Spring with Insulators

Order within the next 11 hrs and your part ships today!
$5.50

SCREW

Order within the next 11 hrs and your part ships today!
$18.38

Drive Belt - 6 ribs

Order within the next 11 hrs and your part ships today!
$45.12

Tub-To-Pump Hose

Order within the next 11 hrs and your part ships today!
$39.29

Drain Hose

Order within the next 11 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broken Door Catch

  • Customer: Joy from Columbia, MO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 488 of 487 people found this instruction helpful
This was one of the simpliest repairs I have ever done taking less than 5 minutes to complete. On the inner door I removed the two screws that hold the plastic catch in place. I then removed the broken catch and put the new catch in place. Finally I replaced the two screws that hold the catch in place and it was done. read more

Door on washer wouldn't lock or start

  • Customer: DOUG from KING FERRY, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 317 of 370 people found this instruction helpful
1. Unplug unit.
2. Unscrew 2 nuts holding top in place in rear of unit using phillips head screwdriver.
3.Slide top back and remove.
4. Open door of washer and unscrew 2 screws holding in door lock unit.
5.Pull out unit from the top and install new unit reconnecting the 3 wire connections. read more

Both vibration shock absorbers broken

  • Customer: Douglas from Medical Lake, WA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Socket set
  • 112 of 119 people found this instruction helpful
removed 2 screws and removed top access cover. removed 2 screws and removed front access cover. removed 4 retaining pins (one with nammer and punch because it was stuck) connected lower ends of new shocks with plastic pins, extended each shock to slip fit and connected upper ends to wash tub mounts. Reinstalled panels. I wish I could say that it all went w... read more