Models > CTB1925DRW > Parts

CTB1925DRW Magic Chef Refrigerator - Parts

All parts for the Magic Chef Refrigerator CTB1925DRW

Below is a list of all parts for the Magic Chef Refrigerator CTB1925DRW - Top Freezer, Top Mount. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the CTB1925DRW
15-28 of 175
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Evaporator Fan Motor - 115V 60Hz - Blade NOT Included

This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils.


Lower Hinge Pin

This lower hinge pin is just over an inch long. It is black in color and is made of plastic. It is located on the bottom part of the door hinge.


Compression Nut

This compression nut is used with the plastic water line of the icemaker assembly.


Hinge Washer


Ice Stripper

This part strips ice from the icemaker mold during the ejection cycle to prevent ice pieces from falling back into the mold.


Crisper Glass Shelf

This is just the glass shelf. The frame is sold separately.


Cold Control Knob - Fresh Food

This knob is used to change the internal temperature of a refrigerator's fresh food section.



This fourteen cube ice cube tray is eleven inches long. It is all white in color and is made entirely of plastic.


Plastic Tubing

1/4" Plastic tubing, 8 1/2 feet long.


Center Hinge


Clip -On Defrost Thermostat

This thermostat cuts out at 38 degrees Fahrenheit. The thermostat will sense the temperature increase in the evaporator during the defrost cycle and will cycle the defrost heater o...


Kickplate With Clips - White



This screw is sold individually.


Single Hex Head Screw

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".

All Parts for the CTB1925DRW
15-28 of 175