Models > CTA14CBSL

CTA14CBSL Hotpoint Refrigerator - Overview

Get Parts and Repair Help for CTA14CBSL

If you know the refrigerator repair part you need, you can browse the list of all parts on the CTA14CBSL, or you can search by name or part description. You can also find your part by where it is located on the CTA14CBSL by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the CTA14CBSL [Viewing 3 of 3]

$11.93

Package of 12 Screws

$11.29

Door Shelf Retainer Bar End Cap

$4.09

Ice Cube Tray

$7.05

Screw

Comes 12 in a pack.

$95.77

Condenser Fan Motor

This condenser fan motor operates in a clockwise fashion. The fan itself has two 1/4 inch spade terminals. It carries 2 watts and 115 volts. This motor NO longer comes with cover f...

$6.20

Retainer Bar End Cap

$12.82

Power Cord

$3.00

SCREW

Size: 10-16 ab. * Part may differ in appearance, but functions same as original. Sold Individually.

$9.82

Door Hinge Pivot

$9.20

Hinge Shim

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Wouldn't cool

  • Customer: Clarence from Great Cacapon WV
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 13 of 17 people found this instruction helpful
I removed the 3 screws that held the motor and fan. Exchanged fan blades and reinstalled the fan and new motor

I was surprised to find the motor. The refrigerator/freezer was over 28 yrs old. Works fine now read more

Noisy Fan Motor - Bearing went out.

  • Customer: Robert from Carpinteria CA
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver
  • 9 of 12 people found this instruction helpful
Moving the frig out and cleaning was the hardest part of this job - lots of dust collected over the 17 years the frig was in place. Once all the cleaning was done, with the frig out and back cover off (10 -12 screws taken off with nutdriver),I plugged the frig in and observed the the problem was a noisy fan motor. The motor is at the very back of the frig wi... read more

Refridgerator was running constantly and condesor would get very hot, condesor fan would only turn on if I spun it.

  • Customer: Raymond from Los Lunas NM
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Socket set
  • 5 of 6 people found this instruction helpful
Unplugged fridge removed the three screws that held fan on to fan frame unplugged condensor fan removed brackets from old fan and put them on new fan installed new fan plugged in fridge and now it works great! read more