Quick Question!

Have you ever purchased from PartSelect.com before?

Models > CTA13CKBLAD

CTA13CKBLAD Hotpoint Refrigerator - Overview

Get Parts and Repair Help for CTA13CKBLAD

If you know the refrigerator repair part you need, you can browse the list of all parts on the CTA13CKBLAD, or you can search by name or part description. You can also find your part by where it is located on the CTA13CKBLAD by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for CTA13CKBLAD parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the CTA13CKBLAD

[Viewing 3 of 3]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

$6.29

SWITCH LIGHT

$8.27

Light Socket

$13.38

Package of 12 Screws

$8.12

Screw

Comes 12 in a pack.

$4.39

Mounting Grommet

Used to help hold the compressor in place. They are sold individually.

$14.02

Power Cord

$8.05

Ice Cube Tray

14 Cube.

$10.52

Hinge Shim

$74.35

PAN COVER

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Sticking Light Switch

  • Customer: Jonathan from Lilburn, GA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 74 of 86 people found this instruction helpful
I applied some tips learned by reading other reviews. So before I started I grabbed my trusty vise grip pliers and a small screw driver. I locked onto the switch actuator, the part that the refrigerator door pushes in, with the vise grips and pulled on it just hard enough to get the screw driver inserted in the right side to push in the catch clip so the swi... read more

bad light socket

  • Customer: nancy from silsbee, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 29 of 35 people found this instruction helpful
unplugged refrigerator. removed light bulb from old socket. unsnapped old light socket and pulled it out just enough to diconnect the electrical plug that plugs into the socket . discarded the old socket and plugged in new socket. snapped in new socket into refrigerator. i watched how to do this simple procedure on you tube and decided to do it myself. easy ... read more

Light switch inside refrigerator wasn't working

  • Customer: Erick from Elmhurst, NY
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 20 of 26 people found this instruction helpful
First turned off power and removed top shelf.
Then I used a flathead to slowly pry the switch out by the two sides. You just anlge ita bit and it slideds out easily. Then I disconnected the wires from the old switch, connected the new one and installed the new switch by snapping it back into the cutout. read more