Models > CTA13CGDL

CTA13CGDL Hotpoint Refrigerator - Overview

Get Parts and Repair Help for CTA13CGDL

If you know the refrigerator repair part you need, you can browse the list of all parts on the CTA13CGDL, or you can search by name or part description. You can also find your part by where it is located on the CTA13CGDL by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the CTA13CGDL [Viewing 3 of 3]

$11.93

Package of 12 Screws

$4.91

Light Socket

$7.05

Screw

Comes 12 in a pack.

$12.82

Power Cord

$3.71

Ice Cube Tray

$3.76

Mounting Grommet

Used to help hold the compressor in place. They are sold individually.

$2.66

SCREW

$95.46

Temperature Control Thermostat

This part maintains the proper temperature. When the refrigerator reaches the desired temperature, this part interrupts the flow of electricity to the compressor which stops the cooling process.

Door Shelf Retainer Bar End Cap

This almond colored door shelf end cap is a little under three inches long.

$9.20

Hinge Shim

Common Symptoms of the CTA13CGDL [Viewing 1 of 353]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Sticking Light Switch

  • Customer: Jonathan from Lilburn GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 35 of 39 people found this instruction helpful
I applied some tips learned by reading other reviews. So before I started I grabbed my trusty vise grip pliers and a small screw driver. I locked onto the switch actuator, the part that the refrigerator door pushes in, with the vise grips and pulled on it just hard enough to get the screw driver inserted in the right side to push in the catch clip so the swi... read more

bad light socket

  • Customer: nancy from silsbee TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 9 of 11 people found this instruction helpful
unplugged refrigerator. removed light bulb from old socket. unsnapped old light socket and pulled it out just enough to diconnect the electrical plug that plugs into the socket . discarded the old socket and plugged in new socket. snapped in new socket into refrigerator. i watched how to do this simple procedure on you tube and decided to do it myself. easy ... read more

The refrigirator light would not come on.

  • Customer: Jania from Novato CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 9 of 11 people found this instruction helpful
Poped out with screwdriver the old swithch and unplugged the two wires. Plugged in the wires to the new swithch and pushed it back in the hole where the old switch was before. read more