CSX22BCBCWH Hotpoint Refrigerator - Instructions

replace the lower door hinge assy. and closer cam as a set.Only used a 1/4" socket and ratchet.The process was very easy without any problems.

I'm a real novice at appliance repair but learned a lot from this effort. After doing enough online research and watching videos, I diagnosed the problem with my 20 year old ice maker. It was working, just not getting water. So I ordered a new water valve, much cheaper than the part Sears recommended. I easily hooked up the new valve but the old copper water supply line was leaking so I ordered a $7 pex line from Home Depot. Hooked it all back up and now I'm in business, and saved some money too!

Piece of cake and now I get loads of ice.

I followed a video supplied with the e-mail notification of the shipment of the part. This was one of the best experiences I have had with locating, purchasing and installing a replacement part for an appliance.

All thumbs, not handy and lacked confidence to even try to fix even simple problems. First, panicked! Next went to U-Tube and imputed Model number of Refrigerator and searched "freezer cold, refrigerator warm." Next, found U-Tube video which showed me how to diagnose, remedy and fix the problem. Determined the problem,and was directed by U-Tube to PartSelect. Searched part name and cost. Compared cost of parts with other part suppliers. Waited about a week to ensure my diagnosis was accurate, then ordered the part. Part came in about 3 days, went back to video instructions from U-Tube, opened area, took pictures and then replaced part. Since then the Refrigerator has worked perfect, let's hope it continues to work well, after this post. New found confidence and belief in my "Handy-Man" ability.

Followed instructions that came with time, also viewed the video of website.

I watched the how to video and followed the instructions. The entire repair took less than 4 minutes. Hardest thing was disconnecting the control panel.

Repair was really easy, bought the part because of partselect video. Saved myself a lot of money vs calling a repairman.

Turned the appliance off, take the back panel off, defrosted the coils. Put a cork in the drain hole and a towel to soak up the water. Four screws take the heaters off, pull the thermostat from the top coil. Unplug the wire at the top. Install the new heaters, clip the thermostat on the top coil, route the wires around the side, plug in the heaters. Put the panel back on with four screws, turn the appliance back on. You may need to empty the ice container because it will thaw some and freeze back solid. Most of the time spent defrosting the coils

Followed the instructions. Smooth as silk. This part is better than the original. There appears to be a sensor that beeps when the ice reservoir is full.

Part came in on time, and the repair went smoothly - no problems

I followed the instructions on the youtube video on the company web page. I removed the cover by hand, removed the exisitng flapper door and install the new door, easy as pie.

turned water off removed old water valve moved wires to new one moved water supply and discharges to new one reinstalled new valve

Followed easy video instructions. Loosened the necessary bolts, etc. Replaced hinge assembly, lined up door, lubed the hinge with vasoline. Works perfectly now. May purchase another assembly as spare as it appears this may be a common repair issue.

Took the paper clip, pressed in through the holes on the bottom of the ice dispenser panel. Removed the four screws. Loosened the panel and removed the wires. replaced the flapper door. Then reversed the process. Your video was VERY helpful except for the paper clip. Had to get that off another web site.