CSX20GWSAAD Hotpoint Refrigerator - Instructions

Empty all the good stuff stored in the door. Remove top hinge, lift off door. Remove bottom hinge from door and refrigerator, replace with new hinges. Replace door and reinstall top hinge. Very simple. Worst part was removing all the stuff stored in the door then putting it back! My parts arrived very quickly and I'm very pleased with Part Select.

opened back panel and replaced valve verry easy

The lady of the house was happy. Started shopping for a new fridge. Went on line and found this site with U-Tube video on how to replace the defrost timer. Armed with this newly found knowledge I purchased one from a local vendor for $ 40. Parts Select had it listed for $26. The lady of the house had her doubts and a new unit all picked out so I had to move quick. I removed the rear cover in the freezer section. Put down a couple towels and defrosted the evaporator coils and installed the new defroster timer. Tested the old defrost timer and confirmed it was bad. After 24 hrs the temperatures were good. Still the lady of the house was still shopping. To prove to her I am a refrigerator repairman I pulled the the back cover off the freezer section off again to show her what an expert I am. Dang if it wasn't frozen up again. Checked the defrost heater for continuity and found it to be faulty as well.. Defrosted coils again and ordered new defrost heater from parts select for $68. Local vendor wanted over $120 and it wasn't in stock. Got part delivered regular shipping in less then 72 hrs. By now I am a pro at taking off back cover and defrosting coils. Replaced defrost heater in less then 10 min. Put unit back in service. A week later removed back cover and inspected. All is well. The lady of the house is looking at vacations now instead. I highly suggest this site to save a ton of money. A volt meter helps a lot when it comes to trouble shooting these issues. Bottom line Parts Select saved the day not mention a few cases of beer!

With my wife's help, we emptied the door shelves and removed the door to the kitchen table. The video and instructions for replacing the parts were 100% right. We probably spent more time cleaning the door bottom and gasket than actually changing the hinge assembly! The job went very smoothly and saved us from overspending on a repair to this old fridge, or worse, making a quick decision on buying a new one.

I viewed a how-to video on partselect.com. I removed all items from the door shelves. Used a screw driver to remove the top "hinge" plate. Used a nutdriver to remove the door hinge plate. Removed door, laid on it's side-hinge side up (if you don't have a helper, lay it on a flat service). Simply removed the broken bottom plate and replaced with new part, and reinstalled on refrigerator. Super Simple!

Ordered new Ice Maker from you and fixed the problem completely.

Empty door first then take a phillip heads screw driver and unscrewed the top hinge cover 1 screw. Then used 5/16 nut driver to loosen top hinge from fridge. remove door by lifting and then lay on table to replace the lower washer that is held in by 2 screws and you only need to loosen one all the way leaving one in to align then replace and tighten it up your done.

Followed the video, very simple

Watched the video supplied by manufacturer and followed the instructions. Very easy.

I watched the video on the partselect website once and completed the repair. Very easy!

I followed the instructions of the other DIY selfers wrote on how they took it apart and put it back together. Only thing that took longer was melting the ice. Other than that they gave good instructions. Had it out and back in within 10 maybe 15 mins. most. Have a brand new fridge, probably could last me another 18 years.

The trim piece covering the opening of the dispenser is the first and most difficult part of the disassembly. Take care when removing this piece that it does not break.

Followed Partselect video on how to replace cam riser. Very, very helpful!

just i took off the actuator and replace with the new one in 8 minutes.It was so easy.

when I got on your site I was able to find the part easily & your installation video was a big help. It fit perfectly & was very easy to install--it's working great!!!!!thank you so much