Average Repair Rating: 3.3 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Light out in freezer. Water valve inoperative.
Light switch- Removed old switch light using flat head screwdriver, removed wiring harness, attached new switch and reinstalled. Water Valve- Removed dust panel, removed old valve, including water inlet and outlets (2) and remove wiring harness. switch water inlet line from old switched to new. Installed wiring harness on new valv
... Read moree. Had to drill pilot hole in refrigerator cabinet to match new frame holding water valve. Installed valve, reconnected water outlets (2). reinstalled dust cover.
It was REALLY EASY to ID the parts with your website. I found exactly the rail I needed, and it recommended I buy the other rail as well. Since they were both 15 years old, that sounded like a good idea. The rails installed in about 10 minutes total. Two screws on each rail. The door switches were more challenging, but it was bec
... Read moreause there was a lot of sticky soda on our old door switch, making me think it somehow needed other tools to remove it. No, just patience and effort. Once I removed all sticky stuff from the old switch, it pried out with a flat head screwdriver, the wire plugs came right off, and plugged in the new one. 10 minutes to get the old part out, 1 minute to put the new part in!
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michael
July 11, 2019
Does this door switch control both the door light and the ice augar
For model number 36358575890
Hello Michael, thank you for your question. This controls just the light in the freezer. If the auger isn't working the auger motor may be the issue. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Aaron
October 16, 2019
Hi i am having a really hard time nailing down the part i need and appreciate your help (i will buy it here!)
The light along the back of the refrigerator is working, which seems to be the only referenced light in the manuals. however along the top is a circuit board with led in it, and that is what is broken. every once in a while it does flit on (every month or more) for a split second which has made me question if maybe it is the close door sensor that is broken. in any case o was wanted to figure out what that light circuit board is, and maybe the 2 door close switches and what they go to (one turns the back light on and off, the other does nothing which makes me think it may be the problem
For model number zisp420dxbss
Hello Aaron, thank you for writing. The board you are referring to is the LED Light Board Assembly part number PS12069102. It has LED lights in it to illuminate both the fridge and freezer. The two 3 Terminal Light Switches part number PS296357 for your refrigerator turn the light off when you close the door. One is for the refrigerator side and one is for the freezer side. I hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
