CSK27DHXDAA Hotpoint Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken plastic rail
removed the screw, replace the screw in new picece. Retighten srcew.
Parts Used:
-
KENNETH from LEAVENWORTH, KS
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken side rail for drawer
Removed the 2 screws and put in the rail with the 2 screws. It was easy to identify the part on your web site.
Parts Used:
-
David from Ypsilanti, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
drawer silde-broke
-
Revenda from Decatur, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Grill base broken by appliance repairman
Removed remnants of broken grill from refrigerator frame holding the grill and reseated the new grill.
Parts Used:
-
Marvin from Bradenton, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken produce drawer side rail
Very very simple. The rail is held in by just two screws. Remove these, remove the old rail, replace with new rail, screw it down! The hardest part is actually getting your head into the space where the drawer goes so that you can see the screws you're removing.
Now, why this thing broke to begin with is a whole other story....but at least fixing it is simple.
Now, why this thing broke to begin with is a whole other story....but at least fixing it is simple.
Parts Used:
-
Jeff from Groton, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Our icemaker quit working.
My husband took the old icemaker out before the new one came in. When the new one arrived, I installed it in less than 10 minutes.
Parts Used:
-
Robin from Georgetown, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
slide rail broken
First i had to remove basket, and then remove the two screws in bracket, and replace with new bracket , it took me about two min. to replace.
Parts Used:
-
Philip from Rockford, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bottom hinge on cold storage door need replacement
Removed the door by removing top hinge. Replaced bottom hinge with cam included.Replaced cam on bottom of door.Reset door and replaced top hinge.Only delay was a shim shipped for the bottom of the door was incorrect.This did delay the repair.Partselect was very good about getting the correct shim to me.Thank You.
Parts Used:
-
Max from Castle Rock, CO
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken shelf bracket
Received the part in a couple of days. Replaced drawer slide. Repair completed.
Parts Used:
-
Richard from Oswego, IL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken slide rail at screw attachment point
I removed all items on the shelf that the rail supported. I removed the crisper top and crisper. I removed the 2 screws that held the broken rail and removed the broken rail. I set the new slide rail in place and tightened the 2 srews. Then I reinstalled the crisper and crisper shelf. This was a very simple, easy repair. The most difficult part of the process was identifying the correct replacement rail online.
Parts Used:
-
Henry from Georgetown, KY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice cubes maker worked intermittently
turn off water. turn off electricity. empty freezer section of frozen food. remove ice bucket. loosen two screws holding IM to wall of refrigerator. lift off icemaker, and then unplug it as you remove it. INSTALL new IM by: putting new water funnel onto new IM. attaching adapter cord to IM. plug in IM electrical cord to refrigerator and then hang the new IM onto the two loosened screws on the refrig wall. Now tighten the two screws. the extra adapter electrical cord hangs below the new IM, but does not get in the way when you reinstall old ice bucket. reload food, turn on elec and water. PS. i had a crack in the casing of the new IM, so i got a new one, but that one was cracked too. so i just installed the second cracked one. hope it is not a problem.
Parts Used:
-
john from Vero Beach, FL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The shelf fell down...
... sliding all my cans and bottles into the produce bin. Amazingly, as I am a fifty-something divorcee with no mechanical skills, I was able to identify the broken part on your site. A replacement arrived promptly and fit perfectly. I fixed my own refrigerator!!!!
Parts Used:
-
Ethlie from Los Angeles, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
couldn't hook up water line after takeing doors off for move.
New part came in few days, worked great, now I have water and ice. Couldn't find part anywhere, this was so nice and made it easy to get and fast. Thank you so much
Parts Used:
-
susan from wixom, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Stopped making ice
The video on the site was very helpful. The repair was really easy. It was exactly the way the video showed how to do it. I would definitely use this site again to find parts, figure out the "how-to", and use for skematics of appliances. Thanks.
Parts Used:
-
Todd from New Albany, IN
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No Ice
REplaced old icemaker with a new one. Install simple, However that was not the problem. I then replaced the water valve. Still no ice. I check the electric connection was OK. THe problem was the elbow fitting on the top back of the refrigerater leading to the icemaker was blocked with ice.Cleared it and turned water faucet up all the way. Ice maker worked.
Parts Used:
-
Joseph from Sayville, NY
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!