Models > CSK20GABKAD

CSK20GABKAD Hotpoint Refrigerator - Overview

Get Parts and Repair Help for CSK20GABKAD

If you know the refrigerator repair part you need, you can browse the list of all parts on the CSK20GABKAD, or you can search by name or part description. You can also find your part by where it is located on the CSK20GABKAD by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for CSK20GABKAD parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the CSK20GABKAD [Viewing 4 of 4]

$27.68

Bottom Hinge Assembly

Comes with both cam risers. This hinge kit is suitable for the bottom of either the freezer door or the refrigerator door of some refrigerators.

$3.22

SWITCH LIGHT

$1.78

Hinge Cam Riser

This part helps with the closing of the door and helps keep it in position.

$11.93

Package of 12 Screws

$25.41

Defrost Thermostat

This clip on refrigerator defrost thermostat clips on to your refrigerator's evaporator. It will cut out at 60 degrees Fahrenheit and kick back in when the temperature drops to 32 ...

$3.85

BULB LIGHT

$7.33

Door Hinge Shim

$9.96

Evaporator Fan Blade Kit

$1.70

Screw

This screw is sold individually.

$14.54

Fill Tube Grommet

This fill tube grommet is used on the icemaker.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

My wife said, "the refrigerator door won't close".

  • Customer: Gregory from Zephyrhills FL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 42 of 45 people found this instruction helpful
Our refrigerator is a double door unit with ice and water in the left door. The right door was the one with the problem. It was 5:15 AM when the problem occured. I could see that the door was out of alighnment and had dropped down - preventing it from closing. I lifted the door and closed it. I wrote down the model number and found a detailed drawing of... read more

Sticking Light Switch

  • Customer: Jonathan from Lilburn GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 39 of 43 people found this instruction helpful
I applied some tips learned by reading other reviews. So before I started I grabbed my trusty vise grip pliers and a small screw driver. I locked onto the switch actuator, the part that the refrigerator door pushes in, with the vise grips and pulled on it just hard enough to get the screw driver inserted in the right side to push in the catch clip so the swi... read more

The refrigerator side of the side by side refrigerator stopped regulating its temperature causing cans and bottles to burst.

  • Customer: Jonathan from Cary NC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 31 of 33 people found this instruction helpful
I removed the back panel held in place by 5 screws. I located the thermostat and disconnected it from the wire connection to another part. Due to the connection requirement, I had to cut the wires from the original part and splice the connector with wires to the new part. After securing the spliced wires and covering in electrical tape, I replaced the pan... read more