Models > CSG9000BAE

CSG9000BAE Maytag Cooktop - Overview

Get Parts and Repair Help for CSG9000BAE

If you know the cooktop repair part you need, you can browse the list of all parts on the CSG9000BAE, or you can search by name or part description. You can also find your part by where it is located on the CSG9000BAE by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. We’ve also included any installation videos we have for CSG9000BAE parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the CSG9000BAE [Viewing 2 of 2]

$42.42

Sealed Burner Cap with Electrode

This burner cap assembly is sold with the spark electrode. Please note this part has been redesigned and no longer requires a gasket. Sold individually.

$2.70

Screw

This screw is sold individually.

$4.60

SCREW

$3.71

Igniter Wire

SCREW

$2.70

Frame Screw

Sold Individually.

$20.79

Drip Bowl

$93.95

USE WPL 74006282

$38.31

Burner Spark Ignition Switch

$18.86

Seal Tape

This piece of adhesive seal tape is eighty-nine inches long. It is made of black rubber and has a white backing that peels off easily. This seal tape is designed to fit around the drip pans of your appliance.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

A burner wouldn't spark strongly enough to light the gas.

  • Customer: Matthew from Brookfield MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 76 of 87 people found this instruction helpful
Replacement of these burners is very easy. You just twist the burner counterclockwise a quarter turn and pull it out. (You may need a big wrench if the range is very old.) Once out, just pull the two wires off and push them onto the new burner. Crimp them on with pliers if they're loose -- mine were. Twist the burner back on.
If the gasket under the bu... read more

BURNER WAS WORN OUT

  • Customer: arnold from la punte CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 14 of 15 people found this instruction helpful
burner head arrived when i got home from work. just timely to cook for dinner that monday night, got the 4 burners disconnect the element from the old burner, then connect element to the new bunners, in less than 10 mins, and i had save estimate $600 buying a brand new stove or gas range, this will last me another5 to 10 years. especially this time of rec... read more

Burners would not light and the flame would come out from the bottom of the burner.

  • Customer: juan from aurora IL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 8 of 9 people found this instruction helpful
A quarter turn counter-clockewise and the burner came out. Disconnect the old wires and connect the new wires. Place the burner in its place and a quarter turn clockwise and it was set. read more