Models > CSG7000BAB

CSG7000BAB Maytag Cooktop - Overview

Get Parts and Repair Help for CSG7000BAB

If you know the cooktop repair part you need, you can browse the list of all parts on the CSG7000BAB, or you can search by name or part description. You can also find your part by where it is located on the CSG7000BAB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the CSG7000BAB [Viewing 2 of 2]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$33.95

Burner Head Cap with Spark Electrode

This is a black burner head with the spark electrode. NOTE: This part has been updated and there is no longer a gasket seal required.

Order within the next 1 hr and 54 mins and your part ships today!
$2.70

Screw

This screw is sold individually.

Order within the next 1 hr and 54 mins and your part ships today!
$2.88

Frame Screw

Sold Individually.

Order within the next 1 hr and 54 mins and your part ships today!
$5.74

SCREW

Sold individually.

Order within the next 1 hr and 54 mins and your part ships today!
$6.26

Igniter Wire

This igniter wire is twenty-eight inches long.

Order within the next 1 hr and 54 mins and your part ships today!
$44.40

Pressure Regulator

This valve automatically cuts off the flow of gas at a certain pressure.

Order within the next 1 hr and 54 mins and your part ships today!
$26.92

Seal Tape

This piece of adhesive seal tape is eighty-nine inches long. It is made of black rubber and has a white backing that peels off easily. This seal tape is designed to fit around the ...

Order within the next 1 hr and 54 mins and your part ships today!
$55.46

Burner Grate

Order within the next 1 hr and 54 mins and your part ships today!
$5.74

SCREW

Sold individually.

Order within the next 1 hr and 54 mins and your part ships today!
$29.86

Burner Spark Ignition Switch

Order within the next 1 hr and 54 mins and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Burner wouldn't start

  • Customer: Yury from Brooklyn NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 19 of 31 people found this instruction helpful
Make a quarter turn counterclockwise, disengage a burner head, disconnect 2 wires, connect to a new head, install turn clockwise.

That's it! read more

burner head was rusted out. ordered 1 to see if part was correct. ordered 4 more to finish job.

  • Customer: Robert from Somerville TN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 9 of 13 people found this instruction helpful
unscrewed old burner head ;disconnected 2 wires; repaced with new burner head and replaced wires. Unfortunately, before we really needed to replace the other burner heads, the cooktop itself developed a gas leak. We decided to replace the whole thing, and therefore would like to return the unboxed, unused 4 remaining burner heads. read more

burners and drip pans rusted through

  • Customer: Gordon from Deville LA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 8 of 15 people found this instruction helpful
I first had to cut off electrical power to the stove top and then remove a little built up grease around the seams where the parts fit together. I then removed the burner head by twisting about 30 degrees and lifting. I then disconnected the spark ignighter wire, ( a slide on spade). This exposed the two screws that hold the drip pan in place. I had to use... read more