Models > CSG5600BAW > Instructions

CSG5600BAW Maytag Cooktop - Instructions

All installation instructions for CSG5600BAW parts

These instructions have been submitted by other PartSelect customers and can help guide you through the cooktop repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the CSG5600BAW
1-8 of 8
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Burner wouldn't start

  • Customer: Yury from Brooklyn NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 14 of 23 people found this instruction helpful
Make a quarter turn counterclockwise, disengage a burner head, disconnect 2 wires, connect to a new head, install turn clockwise.

That's it!

burner head was rusted out. ordered 1 to see if part was correct. ordered 4 more to finish job.

  • Customer: Robert from Somerville TN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 6 of 7 people found this instruction helpful
unscrewed old burner head ;disconnected 2 wires; repaced with new burner head and replaced wires. Unfortunately, before we really needed to replace the other burner heads, the cooktop itself developed a gas leak. We decided to replace the whole thing, and therefore would like to return the unboxed, unused 4 remaining burner heads.

Igniter Switch on the burner was constantly on

  • Customer: Roman from West Caldwell NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 4 of 9 people found this instruction helpful
To get to the switch I had to remove the knobs and the front panel of the burner valves. There were some dozen screws, top and bottom holding the panel in-place.
The switch slid off the burner valve stem easily but removing the wires I had to pull with the pliers. There seamed not to be a wire release that I could see.
Replacing the wires was no problem. They slid into place by just pushing them in. Assembly was the reverse.

BURNER HEAD RUSTED OUT

  • Customer: Edmundo from San Antonio TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
SLIGHTLY TURN BURNER HEAD CLOCKWISE AND IT COMES OUT. PULLED OUT SPARK ELECTRODE WIRE AND HAND INSTALLED IT INTO NEW PIECE. CLEANED AREA AND REPLACED BURNER HEAD WITH A SLIGHT TWIST TO LOCK IN PLACE. BOUGHT TWO AND HAVE SPARE ONE LEFT. OTHER THREE BURNERS ARE OK BUT SLIGHTLY RUSTED. WE ARE READY FOR THE NEXT ONE TO SHOW A LEAK. MAY JUST REPLACE THE ONE THAT SEEMS MORE WORN OUT. GREAT SOLUTION. SAVED A BUNDLE ON REPAIRS AND DELAYED HAVING TO BUY NEW STOVE. THIS ONE HAS WORKED PERFECTLY FOR OVER TEN YEARS.

no ignition to burner head

  • Customer: Patricia from Forked River NJ
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
ordered 2 burner heads- 1 at a time did not fix had to order a module-spark which solved the problem

Old Burner Head Caps No Longer Work And Need To Be Replaced

  • Customer: Stan from San Leandro CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
The burner head caps on my Magic Chef no longer work and had to be replaced. I ordered 1 of the 4 caps to see how it would work out for me. I did not have any issues replace the cap. I contacted PartSelect and order the other 3 caps. The sales representative took my order and was EXTREMELY helpful. Now I know why all of my neighbors choose PartSelect. Including the cleaning, it did not take me more than 15 minutes. The video was also extremely helpful. Our Magic Chef should be good for another 6-8 years. Thanks PartSelect.

Burner head would not fire,electrode broken

  • Customer: Arthur J from Forked River NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
turn burner cap counter clock wise lift out remove to leads,do not have to turn power off they are mini volts.Insert the two (leads)weirs on to new cap,twist back in done.Fire it up.

burner head rusted out and not flaming properly

  • Customer: David from Warwick NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
quarter turn with hand to remove old head...removed two wire leads attached to head to reattach to the new head...each wire fitting is different so you can't mess up...put on new burner head..quater turn to tighten...done...thanks...
All Instructions for the CSG5600BAW
1-8 of 8