Models > CSF24EMR > Parts

CSF24EMR Hotpoint Refrigerator - Parts

All parts for the Hotpoint Refrigerator CSF24EMR

Below is a list of all parts for the Hotpoint Refrigerator CSF24EMR - Side-by-side. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the CSF24EMR
1-14 of 220
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Bottom Hinge Assembly

Comes with both cam risers. This hinge kit is suitable for the bottom of either the freezer door or the refrigerator door of some refrigerators.


Package of 12 Screws


Evaporator Fan Blade Kit


Evaporator Fan Motor - Harness NOT Included

This evaporator fan motor operates in a counter clockwise fashion. This motor's shaft is 3/8 of an inch and the motor has two right side terminals. NOTE: Harness wires NO longer comes with the part.


Retainer Bar End Cap


Defrost Thermostat

This refrigerator defrost thermostat will cut out at 60 degrees Fahrenheit and kick back in when the temperature drops to 40 degrees Fahrenheit. Use it for your GE brand refrigerator.


Door Shelf Retainer Bar End Cap


Door Shim Cam

Sold individually.



Comes 12 in a pack.


Condenser Fan Motor

This condenser fan motor operates in a clockwise fashion. The fan itself has two 1/4 inch spade terminals. It carries 2 watts and 115 volts. This motor NO longer comes with cover for terminals.


Ice Cube Tray

14 Cube.


Door Hinge Shim Riser Cam


Rear Wheel

This rear wheel is sold individually. The wheel pin is not included with this roller.


Defrost Timer

This refrigerator defrost timer will cycle for twenty-five minutes after every six hours of run time. The timer itself is made of plastic, but its terminals are bent and the leads are external.

All Parts for the CSF24EMR
1-14 of 220