Quick Question!

Have you ever purchased from PartSelect.com before?

Models > CSF24EMR

CSF24EMR Hotpoint Refrigerator - Overview

Get Parts and Repair Help for CSF24EMR

If you know the refrigerator repair part you need, you can browse the list of all parts on the CSF24EMR, or you can search by name or part description. You can also find your part by where it is located on the CSF24EMR by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for CSF24EMR parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the CSF24EMR

[Viewing 4 of 4]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$36.49

Bottom Hinge Assembly

Comes with both cam risers. This hinge kit is suitable for the bottom of either the freezer door or the refrigerator door of some refrigerators.

$12.68

Package of 12 Screws

$12.01

Door Shelf Retainer Bar End Cap

$11.74

Evaporator Fan Blade Kit

$8.05

Ice Cube Tray

14 Cube.

$128.03

Condenser Fan Motor

This condenser fan motor operates in a clockwise fashion. The fan itself has two 1/4 inch spade terminals. It carries 2 watts and 115 volts. This motor NO longer comes with cover for terminals.

$7.68

Screw

Comes 12 in a pack.

$3.70

Door Shim Cam

Sold individually.

$30.10

RETAINER STRIP

$21.84

DOOR STOP

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

My wife said, "the refrigerator door won't close".

  • Customer: Gregory from Zephyrhills, FL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 45 of 48 people found this instruction helpful
Our refrigerator is a double door unit with ice and water in the left door. The right door was the one with the problem. It was 5:15 AM when the problem occured. I could see that the door was out of alighnment and had dropped down - preventing it from closing. I lifted the door and closed it. I wrote down the model number and found a detailed drawing of... read more

Noisey fan/motor (bad motor bearing ?)

  • Customer: Keith from Fort Worth, TX
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 26 of 31 people found this instruction helpful
Removed 2 phillips head screws to remove ice maker (could have just loosened them)
Pulled fan off of shaft
Removed 2 phillips head screws on motor bracket , disconnected three motor wires & removed motor.
reversed process to install new motor & fan blade.
Space was a little tight for two hand and arms, but do-able. read more

Fridge door wouldn't close easily like it used to

  • Customer: Christopher from Roseville, MN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Socket set
  • 14 of 15 people found this instruction helpful
This is a sibe-by-side refrigerator/freezer that needed a new lower hinge set for the fridge door.

First I removed everything from inside the fridge door, closed it, then loosened the top hinge bolts with an 8mm socket on a 1/4-inch ratchet. Using an 8mm nutdriver, I removed one bolt and loosed the other just far enough to be able to lift the hi... read more