Quick Question!

Have you ever purchased from PartSelect.com before?

Models > CSD2725ARA > Parts

CSD2725ARA Magic Chef Refrigerator - Parts

All parts for the Magic Chef Refrigerator CSD2725ARA

Below is a list of all parts for the Magic Chef Refrigerator CSD2725ARA - Side-by-side. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the CSD2725ARA
1-14 of 281
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.80

Light Bulb - 40W

This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these repla...

$96.00

Replacement Ice Maker

This is a replacement ice maker. This assembly includes the ice mold and the control device. The water inlet valve pumps water into the mold, which stays there until it is frozen solid and ejected into the storage bucket. The process continues until the bucket is full. This replacement part does not include the cover, shut off arm, wire harness, or the mounting hardware. You will need to use the existing pieces, or order those separately. You will need a nut driver to successfully install this part. Unplug your appliance before you begin any repair work.

$11.11

Light Rocker Switch

This light rocker light switch is used in a number of household appliances. It is most often found in refrigerators and freezers. This is a simple mechanism that helps turn the lig...

$2.96

Screw

This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.

$37.73

Condenser Fan Motor Kit

This condenser fan motor kit is designed for use with refrigerators. This fan draws air through the condenser coils and over the compressor. It does this with the goal of cooling t...

$23.15

Light Switch

This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light when your fridge door is open, and to make sure it is off when your refrigerator door is closed. The reason you would need to replace this part is if your light is not turning on when your door is open. For this repair, you will need a putty knife, and a small flat-blade screwdriver.

$4.88

Screw

Sold individually.

$5.10

BULB-LIGHT

Sold individually. This bulb is a 7-watt appliance incandescent light bulb. This appliance light bulb is two inches long. It is used for many clothes dryers. You will need a Phillips screwdriver and needle-nose pliers. Unplug the power from your dryer. You will find the light bulb by opening your dryer door and locating the casing surrounding the bulb on the top of the inside of the door. You will need to remove the single screw holding it in place to access the bulb. Twist the old bulb out of place. Use your pliers if the base of the bulb is still inside the socket once the glass part of the bulb has been removed. Check to make sure that the socket itself is not damaged. If the socket is damaged it will need to be replaced as well. Screw your new bulb into place.

$5.27

Lower Hinge Pin

This is a lower hinge pin for your refrigerator door. This hinge helps your door open and close easily by allowing it to pivot. You will need to replace your lower hinge pin if you...

$28.84

Icemaker Shut Off Arm

When the icemaker shut off arm is high enough the icemaker will shut off and no more ice will be made until the level of ice in the bin drops. Also, the icemaker can be turned off by lifting the arm all the way to the top until in a locked position. If your icemaker is dispensing too much ice or is not making enough ice, you may have to replace the icemaker shut off arm. This part is made of white plastic and metal. This icemaker shut off arm may differ in design from your previous part. However, the part will still perform the same function.

$24.22

BLADE-FAN

The fan blade is used to blow air over the condenser.

$2.96

Screw

Sold individually.

$78.60

Ice Dispenser Solenoid and Door Kit

In addition to the solenoid (115V), this kit also comes with a door strike and an ice door assembly. Please be advised the spring and roll pin are not included with this kit.

$15.38

Limit Switch - 2 Terminal

This limit switch, also known as a dispenser switch, is used in refrigerators and freezers. The function of this part is to control the dispensing of ice or water when the dispenser lever is pressed. The switch is over 1 inch long and comes in white or black. It is made from plastic and metal. If your refrigerator is having trouble dispensing water or there is leakage, it is best to replace the switch. The tools needed for this repair are a #15 torks, #2 Phillips screwdriver, #1 Phillips screwdriver, and needle nose pliers. Remember to unplug your appliance from the power source before beginning this installation project and refer to the manual for further installation instructions.

All Parts for the CSD2725ARA
1-14 of 281