Models > CRTEICE

CRTEICE Crosley Ice Maker - Overview

Get Parts and Repair Help for CRTEICE

If you know the ice maker repair part you need, you can browse the list of all parts on the CRTEICE, or you can search by name or part description. You can also find your part by where it is located on the CRTEICE by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your ice maker. We’ve also included any installation videos we have for CRTEICE parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the CRTEICE [Viewing 2 of 2]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$21.30

Water Inlet Valve

When energized, this part releases water from the supply line into the ice mold.

Order within the next 4 hrs and your part ships today!
$120.46

Ice Maker

Order within the next 4 hrs and your part ships today!
$101.76

Replacement Ice Maker

This part is the replacement heat-release ice maker unit only. This kit comes with four round female connectors at the end of the wire harness. It also comes with the adaptor that...

Order within the next 4 hrs and your part ships today!
$6.41

TUBE-WATER FILL

Order within the next 4 hrs and your part ships today!
$5.61

Hex Head Screw

Sold individually.

Order within the next 4 hrs and your part ships today!
$5.43

ICE STRIPPER

Order within the next 4 hrs and your part ships today!
$50.30

Ice Container

Order within the next 4 hrs and your part ships today!
$7.45

GEAR

Order within the next 4 hrs and your part ships today!
$33.48

Water Inlet Tube

This part connects to the water inlet valve to icemaker & in freezer door to dispenser.

Order within the next 4 hrs and your part ships today!
$6.34

SPRING-SHUTOFF ARM

Order within the next 4 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

ICE MAKER STOPPED WORKING

  • Customer: JACK from MESA AZ
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 76 of 81 people found this instruction helpful
IT WAS PRETTY STRAIGHT FORWARD. REMOVE THE TWO SCREWS THAT HOLD THE UNIT TO THE WALL OF THE FREEZER. IN MY CASE, I HAD TO USE A DIFFERENT ICE MAKER THAN WHAT CAME WITH THE FRIG. IN ORDER TO INSTALL THE REPLACEMENT UNIT THEY SENT A WIRE ADAPTOR SO IT WOULD ATTACH TO THE EXISTING WIRING. THAT TOO WAS ALL FINE AND DANDY. THE ONLY PROBLEM WAS THAT THE END O... read more

Broken ice maker

  • Customer: Juan from Miami FL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 61 of 86 people found this instruction helpful
Unplugged faulty ice maker, removed two screws holding it to the refrigerator and took it out. Reversed the operation with the new ice maker and after a few minutes presto, we have ice. read more

Ice maker died!

  • Customer: John from Las Vegas NV
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 21 of 23 people found this instruction helpful
The repair for this was very simple, although it was a tight squeeze. The model I replaced the ice maker on was a side by side. First I removed the ice bucket so I could have more room to work with. Then I unscrewed 2 screws on the left side wall holding the ice maker in place. These screws had a 1/4" nut top on them so I used my socket driver for this. T... read more