Models > CRGR5700AS1

CRGR5700AS1 Frigidaire Dryer - Overview

Get Parts and Repair Help for CRGR5700AS1

If you know the dryer repair part you need, you can browse the list of all parts on the CRGR5700AS1, or you can search by name or part description. You can also find your part by where it is located on the CRGR5700AS1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for CRGR5700AS1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$19.92

Rear Drum Bearing Kit

This kit includes one bearing, one ball shaft, one ball bearing, one ball bearing retainer, a small tube of high temperature lubricant and installation screws.

$7.61

Drum Belt

This 87-3/4" long dryer drum belt goes around the dryer drum and the pulley to rotate the drum once motor is activated.

$9.25

Selector Knob

This knob can be used with a washer or dryer and takes a D-shaped shaft. Sold individually.

$19.45

Drum Glide - White

Appliance requires 2 .Sold individually.

$2.77

Drum Support Bearing

$23.71

Door Catch

$12.61

Lower Front Felt Seal with Adhesive

$20.29

Turn - Type Start Switch

This part is used to start the dryer once you have selected a setting on the timer.

$18.71

'M' Series Ignition Coil Kit

This ignition coil kit contains two coils. One is a two wire secondary coil, while the other is a three wire booster coil. Both should be used together in your gas clothes dryer.

$12.29

Timer Knob - White with Gray Grip

This knob accepts a D-shaped shaft.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Dryer squealed like a pig and at times the drum stopped rotating

  • Customer: charles from new holland OH
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers, Socket set
  • 491 of 494 people found this instruction helpful
First thought the problem was a stretched drum belt or bad idler pulley. Ordered a new belt and idler assy plus spring. Replaced those items with relative ease following suggestions obtained at this site.However, problem persisted and I now suspected a bad drum bearing. Odered the bearing kit and replaced same using the following procedure.
1. Removed ... read more

Knob replacement

  • Customer: Kevin from Donalsonville GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 371 of 375 people found this instruction helpful
Just slipped them on and ready to go. Ordered them on thur and got em on Tues. read more

Loud Squeaking

  • Customer: Frank from Boyertown PA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 249 of 257 people found this instruction helpful
1. Unplug dryer from outlet
2. Using Lg. flat screwdriver, pry under the front edge of the top and release two spring tabs
3. Lift up top and tilt back out of your way
4. Unscrew two phillips scews on inside of front panel
5. Lift up and out the front panel. Two spring clips at bottom.
6. Rlease tension on drum belt at the motor. Acc... read more