Models > CRG500

CRG500 Maytag Range - Overview

Get Parts and Repair Help for CRG500

If you know the range repair part you need, you can browse the list of all parts on the CRG500, or you can search by name or part description. You can also find your part by where it is located on the CRG500 by selecting a section below. We’ve also included any installation videos we have for CRG500 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.52

Light Bulb - 40W

Sold individually.

$18.07

2 Piece Broiler Pan

$17.33

ANCHOR-TIP

$17.55

Light Blub - Fluorescent - 18 Watt

$2.70

Door Handle Spacer Kit

This door handle spacer assembly contains two screws and two spacers.

$4.46

Light Bulb Socket

This light bulb socket is located inside the oven cavity.

$2.70

Frame Screw

Sold Individually.

$2.70

Screw - 6-32 x 5/16

$32.87

Door Side Seal

Sold individually. Order quantity required.

$21.09

Power Cord

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

pilot lit but oven would light

  • Customer: Paul from Arlington MA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers, Wrench set
  • 10 of 13 people found this instruction helpful
replaced the oven safety valve. This device uses heat from the pilot to hold open a valve that allows gas from the thermostat control to feed the main burner. It works by boiling the liquid mercury in the sensor bulb, producing the pressure to hold open the valve. My sensor had failed from old age, leaking the mercury.

Spilled mercury needed to... read more

Replacing the bulb in the freezer side

  • Customer: Yafa (and David) from Bothell WA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 4 of 5 people found this instruction helpful
Removed the ice brucket,
Removed the light shield by releasing one screw using a nutdriver.
Replacing the bulb and reinstalled the light shield.

Your web site is one of the best and most helpfull service sites I ever used. Just wish that in the future you will ship parts overseas. read more

Light Bulb burned out

  • Customer: Jeffrey from Marietta GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 2 people found this instruction helpful
Removed the two screws that hold the back glass in place. Rotated old bulb out of it's lamp fixture and replaced it with the new bulb. Replaced glass and reinstalled the screws.
The hardest part was finding the bulb ... a very unique 18W flourescent. I wasted a couple of hours trying to locate it locally at my regular suppliers. The order at PatsSelec... read more