Quick Question!

Have you ever purchased from PartSelect.com before?

Models > CRG355

CRG355 Maytag Range - Overview

Get Parts and Repair Help for CRG355

If you know the range repair part you need, you can browse the list of all parts on the CRG355, or you can search by name or part description. You can also find your part by where it is located on the CRG355 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for CRG355 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$32.56

Flat Style Oven Igniter Kit

The flat style oven igniter kit is used in gas ovens and ranges. It is what provides the heat needed to open the gas valve, and it ignites fuel for the burner assembly. This part c...

Order within the next 15 mins and your part ships today!
$6.16

Screw, 10-16 x 1

This screw is sold individually.

Order within the next 15 mins and your part ships today!
$23.78

2 Piece Broiler Pan

This is cookware designed for use in your range or oven. It is a two-piece dish that is used to grill or cook food while the broil function is on, meaning it can withstand high tem...

Order within the next 15 mins and your part ships today!
$3.02

Screw

This screw is sold individually.

Order within the next 15 mins and your part ships today!
$2.96

Frame Screw

Sold Individually.

Order within the next 15 mins and your part ships today!
$134.72

Safety Valve - just over four inches long

This safety valve ensures that no gas is released until the igniter has received the proper voltage needed to ignite the gas range. This safety valve has an amperage range of 3.3 to 3.6 amps. The valve body is just over four inches long.

Order within the next 15 mins and your part ships today!
$34.22

Burner Spark Ignition Switch

Order within the next 15 mins and your part ships today!
$26.51

Oven Door Stop

Order within the next 15 mins and your part ships today!
$2.96

Screw - 6-32 x 5/16

This screw is well under an inch long, and is made of metal.

Order within the next 15 mins and your part ships today!
$45.04

Door Glass

Order within the next 15 mins and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven would not work but the Broiler did

  • Customer: James from Ferndale, MI
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set
  • 293 of 321 people found this instruction helpful
The oven had been working intermittently for a while and after repeated threats of starvation from my spouse I finally took a look even though it was summer and the grill was working fine. The Igniter would glow red when the oven was turned on but the gas would not flow to it no matter what the temperature setting. I searched online and found this site that ... read more

Oven would'nt light

  • Customer: Charles from Charlestown, RI
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 110 of 120 people found this instruction helpful
In most cases if your oven won't light or takes a long time to light you may have a bad igniter even if it glows. To check the igniter use a voltmeter to check for 120 A/C volts going to the igniter and3.5 A/C volts going between the ingniter and the gas valve. My bad ingniter glowed but had only only 3.0 A/C volts going to the gas valve for the oven. The ne... read more

oven failed to light

  • Customer: Beryl from Dawsonville, GA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 58 of 61 people found this instruction helpful
My son replaced the broiler igniter this spring, so I had a clue as to what was required. This was even easier and since I had back surgery recently & my husband was out of town that was a giant plus!

I unplugged the oven, removed the oven door, found the release latch and removed the oven floor. I then removed the 2 screws that held the ignit... read more