Models > CRG300 Maytag

CRG300 Maytag Range - Overview

Get Parts and Repair Help for CRG300

If you know the range repair part you need, you can browse the list of all parts on the CRG300, or you can search by name or part description. You can also find your part by where it is located on the CRG300 by selecting a section below. We’ve also included any installation videos we have for CRG300 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.82

Light Bulb - 40W

Sold individually.

$19.30

2 Piece Broiler Pan

$13.81

Clock Knob

Sold individually.

$2.70

Screw - 6-32 x 5/16

$4.46

Light Bulb Socket

This light bulb socket is located inside the oven cavity.

$2.70

Door Handle Spacer Kit

This door handle spacer assembly contains two screws and two spacers.

$2.70

SCREW

$2.70

Nut

$2.70

Frame Screw

Sold Individually.

$32.87

Door Side Seal

Sold individually. Order quantity required.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

pilot lit but oven would light

  • Customer: Paul from Arlington MA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers, Wrench set
  • 10 of 12 people found this instruction helpful
replaced the oven safety valve. This device uses heat from the pilot to hold open a valve that allows gas from the thermostat control to feed the main burner. It works by boiling the liquid mercury in the sensor bulb, producing the pressure to hold open the valve. My sensor had failed from old age, leaking the mercury.

Spilled mercury needed to... read more

Replacing the bulb in the freezer side

  • Customer: Yafa (and David) from Bothell WA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 4 of 5 people found this instruction helpful
Removed the ice brucket,
Removed the light shield by releasing one screw using a nutdriver.
Replacing the bulb and reinstalled the light shield.

Your web site is one of the best and most helpfull service sites I ever used. Just wish that in the future you will ship parts overseas. read more

oven light burnt out

  • Customer: William from Schwenksville PA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 4 people found this instruction helpful
1. Unscrewed glass cover on bulb
2. Removed old bulb
3. Screwed in new bulb
4. Replaced glass cover
5. Mixed drink & baked cupcakes read more