CREA200ACW Admiral Range - Instructions

I removed the old one and put in the new one. Works great!!!!!!!!!!!!

Unplug Oven. Undid two screws pullout, undid two wires. Plug in two wires, put unit back, put back tow screws. Close oven door, replug oven, turn on oven for test. It worked no fire.

My used stove had been dropped by the previous owner. While I could live with the minor scratches on one side the wooden shims holding up one corner were annoying. A new leveling leg was less than $2. I used a pair of needle nose pliers to straighten the mounting hole and screwed the new leg in. This used stove was originally $2000 but I bought it for $999. the new leg plus shipping was about $10. What a deal.

Removed two screws, pulled out the old element, disconnected the wires from it. Connected the wires to the new element and installed it in with the two screws.

10 Minutes for a stove my landlord thought was not fixable (repairman had already cut the wires to the element and capped them)! The delivery person handed me the package, I got out the single tool needed, installed the part, put away the tool, cleaned my hands, and put a pot of water on the stove to boil for pasta. 10 minutes!

It only took a manner of a few minutes to replace the heating coil in the oven.

I pulled the electric range away from the wall . unpluged the connection. Called my son . I removed the screws from side of the element and we pulled out the wire , one red one white and connected them to the new element. Bingo , done. plugged in the range ,and pushed it backin place. Turned on the oven to see if it works. Good job well done. I'm 77 yrs. and wantd to do it myself, My son, ELECTRICIAN SAID, WAIT MOM. So I did

Well, I had to search a bit deeper in the internet to find out that the problem was not with the surface burner (which did look a bit burned out anyway) but rather with the surface burner switch (Part Number: PS336885) which must have ben damaged by the heat of the closest burner. If this problem would have been better documented (or if I would have searched more carefully) I would have saved over $40 with parts (Surface Burner Receptacle Kit) that I didn't quite need. Repairing the switch was very easy, thanks also to the available video , even though the stove used on this video (front panel) didn't quite match mine (top-back panel).

Actualy I just removed the old ones and replace them with the new ones . And thank you for your prompt delivery I found some one I can trust . Thanks again . Mrs bolanos

simply remove the old and install the new; perfit fit

The Drip Pans are a cinch to replace with no tools necessary. The best part is that the Web Site is extremely easy to use, and the parts arrived two days after being ordered.

Starting by me making a substitute prong to keep the stove working while the part this coming by mail. was a piece of cake.

The range in my classroom had the leveling legs broke off by the summer staff. I ordered two new leveling legs and the night custodian replaced them in about 45 minutes and them leveled the stove. Parts were just as stated and easy to order.

This worked out GREAT. We were about to purchase a new range when I found the needed parts were available. The stores we had contacted had told us our range was too old to have parts available. I had no problem with installing the receptacle at all. The pans went in easly as excepted. My wife is happy with her NEW arrangement. She does not need to learn how to operate a new range. Thanks for your help. The instructions sent were clear and easy to follow.

removed old element - replaced with new element - perfect fit Thank you Part Select fast delivery easy installation by using part select online instructions.