Quick Question!

Have you ever purchased from PartSelect.com before?

Models > CRE7600ADL

CRE7600ADL Maytag Wall Oven - Overview

Get Parts and Repair Help for CRE7600ADL

If you know the wall oven repair part you need, you can browse the list of all parts on the CRE7600ADL, or you can search by name or part description. You can also find your part by where it is located on the CRE7600ADL by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your wall oven. We’ve also included any installation videos we have for CRE7600ADL parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the CRE7600ADL

[Viewing 3 of 3]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

Order within the next 11 hrs and your part ships today!
$20.15

Bake Element (terminal distance of 16")

This oven bake element with push on terminals has a terminal depth of three inches, making a total element length of nineteen inches.

Order within the next 11 hrs and your part ships today!
$5.15

Screw

This screw is sold individually.

Order within the next 11 hrs and your part ships today!
$34.95

Infinite Switch for Eight Inch Range Burner

This infinite switch for eight inch range burners is almost three inches long.

Order within the next 11 hrs and your part ships today!
$46.98

Oven Rack

Used in the lower oven. Sold individually.

Order within the next 11 hrs and your part ships today!
$41.22

SEAL- DOOR

This door seal is fifty-three inches long. It is all black in color and is made of rubber. There are metallic clips sticking out of this seal at various points. These clips help to secure the seal to range doors.

Order within the next 11 hrs and your part ships today!
$49.71

Infinite Switch - 6"

Order within the next 11 hrs and your part ships today!
$5.15

Screw

This screw is sold individually.

Order within the next 11 hrs and your part ships today!
$2.87

Screw (4)

Sold Individually.

Order within the next 11 hrs and your part ships today!
$2.80

Screw

Order within the next 11 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

burned in half

  • Customer: mike from gold bar, WA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 526 of 526 people found this instruction helpful
put the new element in the oven pushed wire onto connector on element held it up to match holes and put the screws back in, very easy to change. I really like the fast way I receive a part from you. read more

No heat - element had burst.

  • Customer: John from Marion, IA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 231 of 295 people found this instruction helpful
Unscrewed 2 screws holding terminal ends of the element in place. Eased the element out, until the two AC power wires were exposed. Pulled off the connectors from the element terminals (pretty tight fit - needed pliers to remove one of them).

Slipped the connectors onto the new element terminals, and eased the element back into the oven wall. Sec... read more

Bake element burnt out

  • Customer: Glenn from Jupiter, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 130 of 193 people found this instruction helpful
Before you touch anything unplug the range or trip the breaker. Pull the racks out of the oven, it gives more room to work. Remove the two screws that hold the element and pull the element out about 2-3". Disconnect the old element. Before you install the new element check the wire and the connectors for age and heat damage. If the connectors are loose repla... read more