Quick Question!

Have you ever purchased from PartSelect.com before?

Models > CRE655

CRE655 Maytag Range - Overview

Get Parts and Repair Help for CRE655

If you know the range repair part you need, you can browse the list of all parts on the CRE655, or you can search by name or part description. You can also find your part by where it is located on the CRE655 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for CRE655 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the CRE655

[Viewing 5 of 5]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.60

Light Bulb - 40W

Sold individually.

$6.03

Surface Burner Plug-In Block Kit

This newer-style terminal block kit includes two metal brackets, two pre-crimped wires with terminals, two ceramic wire nuts, a heat shrinking tube, and a mounting screw.

$56.86

Surface Element - 8" - 2100W

This element has looped terminal ends and 5-turns.

$20.39

Terminal Block

It provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).

$23.06

2 Piece Broiler Pan

The top of this part is now black.

$16.73

Thermostat Knob

This knob accepts a D-shaped shaft.

$3.25

Screw (4)

Sold Individually.

$56.03

Surface Element - 6"

Sold individually.

$7.67

Oven Door Spring

This oven door spring is six inches long, and is made of metal.

$47.42

Infinite Switch - 6"

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Burned terminal block and filter board

  • Customer: Joseph from Decatur, GA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set, Wrench set
  • 71 of 152 people found this instruction helpful
Removed and replaced above named parts, rewired.Be sure to tighten all nuts that secure wires. I believe this is what caused the problem. read more

Inner Oven Glass broken

  • Customer: David from Wayne, NJ
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 26 of 35 people found this instruction helpful
I removed two retainer screws which released the outside panel.
Next I removed 2 screws which hold the middle glass pane from one of its retainer brackets.
The was another panel with 4 screws to remove before reaching the final glass inner assembly.
Once that panel was reoved with the broken glass it was time to put the repacement glass assemb... read more

oven door spring broke and had to be replaced, oven light out and had to be replaced

  • Customer: Ed from Anderson, IN
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 14 of 17 people found this instruction helpful
The old gasket fell apart as I replaced the oven light and had to be replaced. That was very easy once I received the part. The spring broke on the oven door and had to be replaced. I initially tried to reach in from inside the pan drawer under the oven. That was impossible to reaach but it only took a few minutes to realize that I had to remove the side... read more