Models > CRE350 > Instructions

CRE350 Range - Instructions

All Instructions for the CRE350
1 - 15 of 791
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven woudn't heat
1. Removed two screws, pulled out the element, voltage tested the element and determined it was an open circuit (bad element).
2. Ordered the part from partselect.com
3. Disconnected element, connected the new one, and screwed it back in.
Parts Used:
Oven Bake Element
  • David from Shawnee, KS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1281 of 1357 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Element cracked in two pieces
Shut off circuit breaker to stove and collected the tool from the basement. Turned on flashlight. Unscrewed the two hex nuts from the old element/back of the oven. Slid the old element prongs out of the back, exposing the connecting wires. Pulled the connecting wires off of the old element, carefully, so that the connections wouldn't come off of the wires. Threw the old element pieces in the garbage. Connected the new element to the connecting wires and re-fastened the hex nuts. My husband had wanted to call the repair man, but it didn't look too difficult, so I decided to try it on my own. Boy was he surprised when I fixed it, and for a fraction of the cost of hiring a repairman! Ladies, we can do this ourselves!!! :) Thank you for being there for us to order our part from, Parts Select, we had our new part in less than 24 hours, so the shipping was blazing fast!!! Keep up the good work!!! :)
Parts Used:
Oven Bake Element
  • Michael from Green Bay, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
809 of 913 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
drawer glides were broke on front and back
used a screwdriver pushed the old ones out put the new in. the video instructions were great.
Parts Used:
Rear Drawer Glide Front Drawer Glide
  • bryan from sparta, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
570 of 589 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drip bowls were burned and tacky
First I removed the old bowls and replaced them with the new.
Parts Used:
Chrome Drip Bowl - 8 inch Drip Bowl - 6 Inch
  • Donna from Dallas, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
471 of 478 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front slide of bottom drawer broke off.
Inserted new slide as directed by video. Very easy and video was very helpful.
Parts Used:
Front Drawer Glide
  • Jeanette from Alpharetta, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
468 of 470 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven did not heat
removed screws pulled element out. removed wire from old element replaced with new element.very easy
Parts Used:
Oven Bake Element
  • jack from chambersburg, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
433 of 465 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drip bowls needed to be replaced
took old bowls out, put new bowls in, took a coffee break
Parts Used:
Chrome Drip Bowl - 8 inch Drip Bowl - 6 Inch
  • John from Chester, VT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
453 of 542 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
rental property stove only had 2 working burners and bottom drawer off track
first i took out burners then i took out the screws of the termnal block bracket. i then raised the lid on the stoveand clipped the wires on all 4 of the terminal block kits.i then slipped the shrink wrap on wires and used the wire nuts to connect wires together then heated the shrink wrap. I then put screws back in terminal block brackets. I then put the burners on while looking under lid so i would know they were making good connections as this is a bad design from factory. if you pull out burners to clean them and they are not put back in right you dont have a good connection and that causes the terminal blocks to get hot and melt. thats what happened in my case.
As far as the drawer glides they just snap into place
Parts Used:
Terminal Block Kit Rear Drawer Glide Front Drawer Glide
  • Steven from Taylors, SC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
381 of 388 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken slide
Pulled broken one out, slid in the new. Most unbeliveable service I have ever received. Tremndous job, you should sell it to others, Many thanks
Parts Used:
Front Drawer Glide
  • Joseph D. from Stuart, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
368 of 374 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
heating element went out
My husband called our one and only parts store and got a price of $50 for the element. I used a search engine over the weekend and found the same thing for almost half the price. I received an email that said the element was shipped out on Monday, and it arrived on Tuesday afternoon! So my husband removed the two screws that hold the element in place, then replaced it with a new one. I am back in business for the holidays!
Parts Used:
Oven Bake Element
  • LINDA from PERRYSBURG, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
201 of 276 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven's bake element had cracked and was no longer working.
The element is attached to the back of the oven by two small screws. After unplugging the electricity to the oven and removing the attaching screws with a socket set (6.5 mm), you are able to pull the element several inches out from the back of the oven. Doing so exposes where the wiring is connected to the ends of the baking element. The element disconnects from the wiring with a light tug, after which the new element can be connected. I leave the "real" fix-it jobs to the pros ... this was a simple repair that anyone can do.
Parts Used:
Oven Bake Element
  • Brian from Marion, IA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
177 of 247 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old drip pans stained
Replaced old drip pans with new ones - very easy - even a 68 yr old lady can do it!!
Parts Used:
Chrome Drip Bowl - 8 inch Drip Bowl - 6 Inch
  • Linda from Atlanta, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
216 of 425 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bottom drawer broken
Frst I slid the drawer out.I then pryed the broken drawer glides off with a flat blade screwdriver. The new drawer glides then just snap into place,then reinstall the drawer and check for smooth operation.
Parts Used:
Rear Drawer Glide Front Drawer Glide
  • Michael from Middleton, NH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
148 of 273 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven element burnt and broke into two pieces.
FIRST THING! UNPLUG THE OVEN! After I made sure there was no residual charge left in the oven I took a 1/4 inch socket wrench and attached to an interchangable screwdriver and crawled in the oven. I removed both screws and gently pulled on the element until the wire leads came thru. I then unplugged the leads and replaced the element with the new element and plugged them in. Then gently slipped the leads back into the oven and replaced the screws. Turned on the oven and WHA LA!! We had our oven back and running and had chocolate chips cookies in a flash! It was fast and easy and saved me a fortune!
Parts Used:
Oven Bake Element
  • Denise from Fort Wayne, IN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Wrench set
81 of 88 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
drawer was tilting and wouldn't slide open easily.
The old glides were broken off so I didn't know I needed these glides until I saw the parts section of the Manuel. When they arrived I snapped them in with no effort at all.
P.S. The shipping is fantastic here......i ordered on Monday received them on Tuesday. Now that's shipping:>)
Parts Used:
Rear Drawer Glide
  • jennifer from La Habra, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
75 of 76 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the CRE350
1 - 15 of 791