Quick Question!

Have you ever purchased from PartSelect.com before?

Models > CRD22AY-3A

CRD22AY-3A (5M74A) Amana Refrigerator - Overview

Get Parts and Repair Help for CRD22AY-3A

If you know the refrigerator repair part you need, you can browse the list of all parts on the CRD22AY-3A, or you can search by name or part description. You can also find your part by where it is located on the CRD22AY-3A by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the CRD22AY-3A

[Viewing 3 of 3]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.96

Screw

Sold individually.

Order within the next 10 hrs and your part ships today!
$5.20

Rivet

Order within the next 10 hrs and your part ships today!
$9.03

Butter Dish

Order within the next 10 hrs and your part ships today!
$13.72

Hinge Pin Bushing

This bushing is used with a 1/4-inch pin. This part is found in refrigerators (and sometimes freezers). The bushing provides a bearing surface for the hinge pin that rotates. Every time you are opening and closing your fridge, this part is acting as a bearing and makes it so that the door is swinging back and forth with ease. This bushing tends to wear down over time and will need to be replaced. You will notice that this part needs to be replaced if your door is off-kilter and not aligned properly. This part is sold separately. This is a genuine part sourced from the manufacturer directly.

Order within the next 10 hrs and your part ships today!
$5.67

TRAY-EGG

This egg tray holds fourteen eggs.

Order within the next 10 hrs and your part ships today!

Deli Drawer Rail - Left or Right Side

$4.89

Screw

Sold individually.

Order within the next 10 hrs and your part ships today!
$19.35

Leveling Leg

This is an OEM part that is made of metal and sold individually. The leveling leg is generally used with refrigerators, dryers, freezers, ranges, cooktops, and microwaves. The leveling leg is meant to keep your appliance steady and level to the floor. If you notice your appliance is uneven to the floor it may need to have the leveling leg replaced. You will notice that the bottom of the leveling leg has a smooth surface to ensure moving your appliance does not require as much effort. This part screws into a pre-drilled hole underneath the appliance.

Order within the next 10 hrs and your part ships today!

Deli Drawer

$12.68

Screw

Sold Individually.

Order within the next 10 hrs and your part ships today!

Common Symptoms of the CRD22AY-3A

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Meat drawer guide rail broken

  • Customer: Robert from Kelso, WA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 8 of 9 people found this instruction helpful
although this piece s white, my refrigerator had clear plastic guides - both work OK. Remove meat drawer, remove glass shelf from refrigerator. Glass shelf is attached to metal frame by two clips at rear of shelf. Before removing, notice how the clips are fastened to the chrome trim so replacement will be easier. Remove clips with fingers. Glass shelf will t... read more

the rail split on the lower ridge & drawer sagged

  • Customer: Linda from Columbia, MO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 5 of 6 people found this instruction helpful
I removed the drawer, and removed the shelf and both rails. In the back were 2 clips to secure the shelf to the frame and stabilize the rails. Then I could move the glass shelf and access the broken rail and replace it with the beautiful new one. I feel like I Have a new fridge! I found the part on line even though I could not find the plate with the model n... read more

lights did not work

  • Customer: Daniel from rochester hils, MI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 2 of 2 people found this instruction helpful
pulled out old socket and replaced supposed to be a duel socket but no longer exists read more