Models
>
CRA156MT112
CRA156MT112 Frigidaire Air Conditioner - Overview
Sections of the CRA156MT112
[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
FAN BLADE
PartSelect #: PS2364358
Manufacturer #: 5304472356
This part is a fan blade manufactured to fit on the condenser motor shaft of an air conditioner. The function of this part is to circulate air over the condenser to cool the refrigerant before it ente...
$102.74
In Stock
Thermistor
PartSelect #: PS2359381
Manufacturer #: 5304471276
The thermistor on your home air conditioning unit monitors the room temperature. If you discover that your air conditioner is malfunctioning, or will not maintain a consistent temperature, you may hav...
No Longer Available
Evaporator Thermistor Sensor
PartSelect #: PS2359468
Manufacturer #: 5304471383
This evaporator thermistor sensor in your air conditioner measures the temperature of the evaporator coil and adjusts the cooling process accordingly. It is typically attached to the evaporator coil, ...
$32.55
In Stock
Power Cord
PartSelect #: PS2379617
Manufacturer #: 5304476180
This power cord has a three-pronged plug (2 electrical, 1 grounding). The power cord supplies power to the refrigerator, which allows it to keep the contents inside cool. If you notice that your refri...
$165.17
Special Order
Questions And Answers for CRA156MT112
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the CRA156MT112
[Viewing 2 of 2]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Unit condenser won't turn off
Took old part off and replaced after cleaning the coils but it didn't fix it .Now have to figure out what's next.
Parts Used:
-
Lisa from CRESTVIEW, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
2 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fan blade broken when purchased Vibration very bad
Removed Window Air Conditioner from box purchased New. Plastic Fan Blade was broken when purchased and Appliance store would not repair. Second phase removed cover from the fan area removed and replaced fan blade replaced cover and reinstalled unit into the window case.
Parts Used:
-
Don from Tomball,, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers, Socket set
1 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The PC board had water damage was shorted out .
Removed front cover of the unit.removing screws and disconnecting display board from PC board harness . Making shore unit was not plugged in. Pulling unit from casing located pc board box removed cover. Using phillip screwdriver removed PC board from mounting plate . Removed 1 wire at a time and placed in same position on new PC board . W
... Read more
hen I was finish with the wires mounted new pc board on bracket then back to the box secured all hsrdware back in place.front cover connecting display board. Air conditioner works like new! Thanks for your help in getting the part I needed . It came one day later than exspected but im cool and happy.
Read less
Parts Used:
-
Joe L. from Philadelphia, PA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!